Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Unspecified Plasti-Paste® Trowelable Smooth-On, Inc
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Smooth-On, Inc/Plasti-Paste® Trowelable |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 70 |
| Supplementary Information | Test Condition | Test Method | Smooth-On, Inc/Plasti-Paste® Trowelable |
|---|---|---|---|
| Mixing Ratio | 41A:100Bbyweight1A:3Bbyvolume |
| Mechanical properties | Test Condition | Test Method | Smooth-On, Inc/Plasti-Paste® Trowelable |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 1.5 % |
| compressive strength | ASTM D695 | 23.6 MPa | |
| Tensile modulus | ASTM D638 | 1160 MPa | |
| tensile strength | 断裂 | ASTM D638 | 11.0 MPa |
| Flexural modulus | ASTM D790 | 1030 MPa | |
| Compression Modulus | ASTM D695 | 336 MPa | |
| bending strength | ASTM D790 | 23.5 MPa |
| thermosetting | Test Condition | Test Method | Smooth-On, Inc/Plasti-Paste® Trowelable |
|---|---|---|---|
| STORAGE STABILITY | 23°C | ASTM D2471 | 8.0to10 min |
| stripping time | 23°C | 90 min |
| physical property | Test Condition | Test Method | Smooth-On, Inc/Plasti-Paste® Trowelable |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D2566 | 0.50 % |
| Viscosity | ASTM D2393 | Paste | |
| density | ASTM D1475 | 1.16 g/cm³ | |
| Specific volume | ASTM D1475 | 0.863 cm³/g |
| Thermal performance | Test Condition | Test Method | Smooth-On, Inc/Plasti-Paste® Trowelable |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 54.4 °C |
Contact Us
Get App
Top