Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 RTP 203 FR UV RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 203 FR UV |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 640 J/m |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 75 J/m |
| hardness | Test Condition | Test Method | RTP US/RTP 203 FR UV |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 116 |
| Supplementary Information | Test Condition | Test Method | RTP US/RTP 203 FR UV |
|---|---|---|---|
| Primary Additive | 20 % |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 203 FR UV |
|---|---|---|---|
| tensile strength | ASTM D638 | 128 MPa | |
| elongation | 屈服 | ASTM D638 | 2.0to3.0 % |
| Tensile modulus | ASTM D638 | 8270 MPa | |
| Flexural modulus | ASTM D790 | 7580 MPa | |
| bending strength | ASTM D790 | 207 MPa |
| Electrical performance | Test Condition | Test Method | RTP US/RTP 203 FR UV |
|---|---|---|---|
| Volume resistivity | ASTM D257 | >1.0E+14 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.015 |
| dielectric constant | 1MHz | ASTM D150 | 3.80 |
| dielectric strength | inOil | ASTM D149 | 19 kV/mm |
| flammability | Test Condition | Test Method | RTP US/RTP 203 FR UV |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | V-0 |
| Limiting Oxygen Index | ASTM D2863 | 34 % |
| physical property | Test Condition | Test Method | RTP US/RTP 203 FR UV |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.20to0.35 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.70 % |
| water content | 0.20 % | ||
| density | ASTM D792 | 1.58 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 203 FR UV |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 227 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 246 °C |
Contact Us
Get App
Top