Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 66 H2 G/25 V0 CT1 LATI ITALY
LATAMID
--
Filler: Glass fiber reinf、25% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LATI ITALY/66 H2 G/25 V0 CT1 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 35 kJ/m² |
| Supplementary Information | Test Condition | Test Method | LATI ITALY/66 H2 G/25 V0 CT1 |
|---|---|---|---|
| dimensional stability | 21.0 |
| Mechanical properties | Test Condition | Test Method | LATI ITALY/66 H2 G/25 V0 CT1 |
|---|---|---|---|
| Tensile modulus | 60°C | ISO 527-2/1 | 7200 Mpa |
| Tensile strain | 断裂,23°C | ISO 527-2/5 | 2.1 % |
| tensile strength | 断裂,23°C | ISO 527-2/5 | 135 Mpa |
| Tensile modulus | 90°C | ISO 527-2/1 | 4800 Mpa |
| Tensile strain | 屈服,150°C | ISO 527-2/5 | 3.7 % |
| Tensile modulus | 23°C | ISO 527-2/1 | 9200 Mpa |
| tensile strength | 屈服,120°C | ISO 527-2/5 | 60.0 Mpa |
| Tensile strain | 屈服,120°C | ISO 527-2/5 | 3.5 % |
| tensile strength | 屈服,150°C | ISO 527-2/5 | 50.0 Mpa |
| Tensile strain | 断裂,120°C | ISO 527-2/5 | 3.9 % |
| Tensile modulus | 150°C | ISO 527-2/1 | 2200 Mpa |
| Tensile strain | 断裂,150°C | ISO 527-2/5 | 4.2 % |
| Tensile modulus | 120°C | ISO 527-2/1 | 3200 Mpa |
| tensile strength | 断裂,90°C | ISO 527-2/5 | 75.0 Mpa |
| 断裂,120°C | ISO 527-2/5 | 60.0 Mpa | |
| 断裂,150°C | ISO 527-2/5 | 50.0 Mpa | |
| Tensile strain | 断裂,60°C | ISO 527-2/5 | 2.4 % |
| 断裂,90°C | ISO 527-2/5 | 3.8 % | |
| tensile strength | 断裂,60°C | ISO 527-2/5 | 95.0 Mpa |
| Electrical performance | Test Condition | Test Method | LATI ITALY/66 H2 G/25 V0 CT1 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 1 |
| flammability | Test Condition | Test Method | LATI ITALY/66 H2 G/25 V0 CT1 |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | V-0 |
| Hot filament ignition temperature | 2.0mm | IEC 60695-2-13 | 900 °C |
| UL flame retardant rating | 3.0mm | UL 94 | V-0 |
| Hot filament ignition temperature | 1.0mm | IEC 60695-2-13 | 900 °C |
| Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| Burning wire flammability index | 2.0mm | IEC 60695-2-12 | 960 °C |
| Limiting Oxygen Index | ASTM D2863 | 35 % |
| physical property | Test Condition | Test Method | LATI ITALY/66 H2 G/25 V0 CT1 |
|---|---|---|---|
| Shrinkage rate | MD:2.00mm | ISO 294-4 | 0.35-0.60 % |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.25 % |
| Shrinkage rate | TD:2.00mm | ISO 294-4 | 0.70-1.0 % |
| Thermal performance | Test Condition | Test Method | LATI ITALY/66 H2 G/25 V0 CT1 |
|---|---|---|---|
| Heat distortion temperature | 连续使用温度4，HDT | 115 °C | |
| 0.45MPa,未退火，HDT | ISO 75-2/B | 255 °C | |
| vicat | ISO 306/B50 | 245 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 240 °C |
| Linear coefficient of thermal expansion | MD：30到100°C | ISO 11359-2 | 8E-06 cm/cm/°C |
Contact Us
Get App
Top