Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PS Kangxi® FRHIPSMIV-0 Wuxi Kangxi Plastics Technology Co.,Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Wuxi Kangxi Plastics Technology Co.,Ltd./Kangxi® FRHIPSMIV-0 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256 | 100 J/m |
| Supplementary Information | Test Condition | Test Method | Wuxi Kangxi Plastics Technology Co.,Ltd./Kangxi® FRHIPSMIV-0 |
|---|---|---|---|
| WeatherResistance | 23°C | ASTM D570 | 0.040 % |
| Mechanical properties | Test Condition | Test Method | Wuxi Kangxi Plastics Technology Co.,Ltd./Kangxi® FRHIPSMIV-0 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 30 % |
| tensile strength | ASTM D638 | 25.0 MPa | |
| Flexural modulus | ASTM D790 | 2100 MPa | |
| bending strength | ASTM D790 | 35.0 MPa |
| Electrical performance | Test Condition | Test Method | Wuxi Kangxi Plastics Technology Co.,Ltd./Kangxi® FRHIPSMIV-0 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
| flammability | Test Condition | Test Method | Wuxi Kangxi Plastics Technology Co.,Ltd./Kangxi® FRHIPSMIV-0 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |
| 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Wuxi Kangxi Plastics Technology Co.,Ltd./Kangxi® FRHIPSMIV-0 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.40 % |
| density | ASTM D792 | 1.15 g/cm³ | |
| Shrinkage rate | TD | ASTM D955 | 0.60 % |
| Thermal performance | Test Condition | Test Method | Wuxi Kangxi Plastics Technology Co.,Ltd./Kangxi® FRHIPSMIV-0 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 75.0 °C |
| 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 85.0 °C | |
| ball-indentation hardness | 80°C | IEC 60695-10-2 | 通过 |
Contact Us
Get App
Top