Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TPE PN-3560 MITSUI CHEM JAPAN
NOTIO™
chip,film,Automotive sector,Plastic modification,adhesive,chip,film,Application in the automotive field,Plastic modification,adhesive
low density,High elasticity,crystallization,Good flexibility,heat-resisting,Amorphous,low density,Amorphous,High elasticity,crystallization,Good flexibility,High heat resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | MITSUI CHEM JAPAN/PN-3560 |
|---|---|---|---|
| Brittle temperature | ASTM D-746 | -28 °C | |
| Glass transition temperature | Internal Method | 135 °C |
| mechanical properties | Test Condition | Test Method | MITSUI CHEM JAPAN/PN-3560 |
|---|---|---|---|
| elongation | Break | Internal Method | >800 % |
| Permanent compression deformation | 23℃, 24 hr | Internal Method | 20 % |
| 70℃, 24 hr | Internal Method | 6 % | |
| Shore hardness | Shore A | ASTM D-2240 | 70 |
| Stretch permanent deformation | 150%Strain | Internal Method | 12 % |
| Tensile modulus | Internal Method | 12 Mpa | |
| tensile strength | Break | Internal Method | 12 Mpa |
| Physical properties | Test Condition | Test Method | MITSUI CHEM JAPAN/PN-3560 |
|---|---|---|---|
| melt mass-flow rate | 230℃/2.16 kg | ASTM D-1238 | 6 g/10 min |
| optical performance | Test Condition | Test Method | MITSUI CHEM JAPAN/PN-3560 |
|---|---|---|---|
| turbidity | 2000 μm, Compression Molded | ASTM D-1003 | 6 % |