Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPE EPIGUM EXP/53 CROSSPOLIMERI ITALY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | CROSSPOLIMERI ITALY/EPIGUM EXP/53 |
|---|---|---|---|
| Impact strength of cantilever beam gap | -20°C | ASTM D256 | >800 J/m |
| hardness | Test Condition | Test Method | CROSSPOLIMERI ITALY/EPIGUM EXP/53 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 60 |
| Mechanical properties | Test Condition | Test Method | CROSSPOLIMERI ITALY/EPIGUM EXP/53 |
|---|---|---|---|
| tensile strength | 屈服 | IEC 60811 | >24.0 MPa |
| Tensile strain | 断裂 | IEC 60811 | >600 % |
| Electrical performance | Test Condition | Test Method | CROSSPOLIMERI ITALY/EPIGUM EXP/53 |
|---|---|---|---|
| Volume resistivity | BS6622 | >1.0E+16 ohms·cm |
| aging | Test Condition | Test Method | CROSSPOLIMERI ITALY/EPIGUM EXP/53 |
|---|---|---|---|
| thermal ageing | 200°C | IEC 60811 | Pass |
| Tensile stress change rate | 135°C,168hr，断裂 | IEC 60811 | <25 % |
| Change rate of tensile strength in air | 135°C,168hr | IEC 60811 | <25 % |
| physical property | Test Condition | Test Method | CROSSPOLIMERI ITALY/EPIGUM EXP/53 |
|---|---|---|---|
| density | ASTM D792 | 0.900 g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 2.0 g/10min |
| Thermal performance | Test Condition | Test Method | CROSSPOLIMERI ITALY/EPIGUM EXP/53 |
|---|---|---|---|
| Flexural modulus | -40°C | Pass | |
| Hot pressing test | 125°C，穿透 | IEC 60811 | <10 % |
Contact Us
Get App
Top