Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PES RTP ESD C 1480 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP ESD C 1480 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 480 J/m |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 53 J/m |
| Electrical performance | Test Condition | Test Method | RTP US/RTP ESD C 1480 |
|---|---|---|---|
| Surface Resistivity | -- | ASTM D257 | <1.0E+6 ohms |
| Volume resistivity | ASTM D257 | <1.0E+3 ohms·cm | |
| StaticDecay | FTMS101C4046.1 | <2.0 sec | |
| Surface Resistivity | -- | ESDSTM11.11 | <1.0E+5 ohms |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP ESD C 1480 |
|---|---|---|---|
| tensile strength | ASTM D638 | 124 MPa | |
| elongation | 屈服 | ASTM D638 | 1.0to2.0 % |
| Tensile modulus | ASTM D638 | 6890 MPa | |
| Flexural modulus | ASTM D790 | 6210 MPa | |
| bending strength | ASTM D790 | 179 MPa |
| flammability | Test Condition | Test Method | RTP US/RTP ESD C 1480 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | RTP US/RTP ESD C 1480 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.20 % |
| water content | 0.040 % | ||
| density | ASTM D792 | 1.39 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/RTP ESD C 1480 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 216 °C |
Contact Us
Get App
Top