Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE)+TPE Generic PPE+TPE Generic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Generic/Generic PPE+TPE |
|---|---|---|---|
| Shore hardness | 23°C | ASTM D2240 | 70to93 |
| film | Test Condition | Test Method | Generic/Generic PPE+TPE |
|---|---|---|---|
| Tear resistance of pants | ISO 6383-1 | 7.00to46.0 N/mm |
| Mechanical properties | Test Condition | Test Method | Generic/Generic PPE+TPE |
|---|---|---|---|
| fracture | ASTM D638 | 93to310 % | |
| ISO 527-2 | 90to230 % | ||
| ISO 527-2 | 8.75to23.0 MPa | ||
| ASTM D638 | 8.50to27.4 MPa |
| Electrical performance | Test Condition | Test Method | Generic/Generic PPE+TPE |
|---|---|---|---|
| dielectric strength | 23°C | IEC 60243-1 | 21to26 kV/mm |
| flammability | Test Condition | Test Method | Generic/Generic PPE+TPE |
|---|---|---|---|
| Hot filament ignition temperature | IEC 60695-2-13 | 725to800 °C | |
| Burning wire flammability index | IEC 60695-2-12 | 743to960 °C | |
| Limiting Oxygen Index | ISO 4589-2 | 24to29 % |
| physical property | Test Condition | Test Method | Generic/Generic PPE+TPE |
|---|---|---|---|
| Shrinkage rate | MD:23°C | ASTM D955 | 0.40to1.1 % |
| TD:23°C | ASTM D955 | 0.33to1.1 % | |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.059to0.23 % |
| density | ASTM D792 | 1.01to1.33 g/cm³ | |
| melt mass-flow rate | 250°C/10.0kg | ASTM D1238 | 5.1to16 g/10min |
| Thermal performance | Test Condition | Test Method | Generic/Generic PPE+TPE |
|---|---|---|---|
| UL temperature rating | 80to105 °C |
Contact Us
Get App
Top