Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Unspecified Lushan PJ-1 Guangzhou Lushan New Materials Co., Ltd
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Guangzhou Lushan New Materials Co., Ltd/Lushan PJ-1 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 30 J/m |
| Supplementary Information | Test Condition | Test Method | Guangzhou Lushan New Materials Co., Ltd/Lushan PJ-1 |
|---|---|---|---|
| Shore hardness | 90°C | DIN 30678 | 210.0 µm |
| thermal performance | Test Condition | Test Method | Guangzhou Lushan New Materials Co., Ltd/Lushan PJ-1 |
|---|---|---|---|
| brittle temperature | ASTM D746 | <-30.0 °C | |
| vicat | ASTM D1525 | 138 °C | |
| Oxygen induction time | 220°C | ISO 21809-1 | 32 min |
| Mechanical properties | Test Condition | Test Method | Guangzhou Lushan New Materials Co., Ltd/Lushan PJ-1 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 500 % |
| tensile strength | 屈服 | ASTM D638 | 28.0 MPa |
| Electrical performance | Test Condition | Test Method | Guangzhou Lushan New Materials Co., Ltd/Lushan PJ-1 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 25 kV/mm | |
| volume resistivity | IEC 60093 | 1E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | Guangzhou Lushan New Materials Co., Ltd/Lushan PJ-1 |
|---|---|---|---|
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 0.50 g/10min |
| Environmental stress cracking resistance | ISO 21809-1 | 1300 hr | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 585 | 0.030 % |
| density | ASTM D1505 | 0.906 g/cm³ |
| aging | Test Condition | Test Method | Guangzhou Lushan New Materials Co., Ltd/Lushan PJ-1 |
|---|---|---|---|
| thermal ageing | 140°C | DIN 30678 | 23 % |
Contact Us
Get App
Top