Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEI KMI PEI KM-H00R IEP KMI Group, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | KMI Group, Inc./KMI PEI KM-H00R IEP |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 160 MPa |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 65 J/m |
| tensile strength | 23°C | ASTM D638 | 125 MPa |
| Flexural modulus | 23°C | ASTM D790 | 3500 MPa |
| elongation at break | 23°C | ASTM D638 | 13 % |
| Electrical performance | Test Condition | Test Method | KMI Group, Inc./KMI PEI KM-H00R IEP |
|---|---|---|---|
| Dissipation Factor | ASTM D150 | 0.015 | |
| Volume resistivity | ASTM D257 | >1.0E+15 Ω.cm | |
| dielectric strength | ASTM D149 | 28 KV/mm | |
| dielectric constant | ASTM D150 | 3.10 |
| Flame retardant performance | Test Condition | Test Method | KMI Group, Inc./KMI PEI KM-H00R IEP |
|---|---|---|---|
| UL flame retardant rating | UL -94 | V-0 . |
| physical property | Test Condition | Test Method | KMI Group, Inc./KMI PEI KM-H00R IEP |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D995 | 0.50-0.70 % |
| density | ASTM D792 | 1.30 g/cm³ | |
| Water absorption rate | ASTM D570 | 0.25 % | |
| melt mass-flow rate | ℃/Kg | ASTM D1238 | 9.0 g/10min |
| Thermal performance | Test Condition | Test Method | KMI Group, Inc./KMI PEI KM-H00R IEP |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa未退火，HDT | ASTM D648 | 208 °C |
| vicat | 熔融温度 | ASTM D3418 | 340 °C |
Contact Us
Get App
Top