Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS OCL-4036 SABIC INNOVATIVE US
LNP™ LUBRICOMP™
Electronic and electrical components
Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/OCL-4036 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed,3.20mm | ASTM D648 | 267 °C |
| 1.8MPa,Unannealed,64.0mmSpan | ISO 75-2/Af | 263 °C | |
| Linear coefficient of thermal expansion | MD:-40to40°C | ASTME831 | 1.6E-05 cm/cm/°C |
| TD:-40to40°C | ISO 11359-2 | 3.4E-05 cm/cm/°C | |
| TD:-40to40°C | ASTME831 | 3.4E-05 cm/cm/°C | |
| MD:-40to40°C | ISO 11359-2 | 1.8E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/OCL-4036 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 21100 Mpa | |
| ISO 178 | 21100 Mpa | ||
| bending strength | ISO 178 | 262 Mpa | |
| ASTM D790 | 259 Mpa | ||
| elongation | Break | ASTM D638 | 1.4 % |
| Friction coefficient | Dynamic | ASTM D3702Modified | 0.39 |
| Static | ASTM D3702Modified | 0.34 | |
| Tensile modulus | ASTM D638 | 21500 Mpa | |
| ISO 527-2/1 | 30700 Mpa | ||
| Tensile strain | Break | ISO 527-2 | 1.1 % |
| tensile strength | Break | ISO 527-2 | 167 Mpa |
| Break | ASTM D638 | 169 Mpa | |
| Wear factor | Washer | ASTM D3702Modified | 19.0 10^-10in^5-min/ft-lb-hr |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/OCL-4036 |
|---|---|---|---|
| Shrinkage rate | TD:24hr | ASTM D955 | 0.30-0.40 % |
| TD:24hr | ISO 294-4 | 0.36-0.40 % | |
| MD:24hr | ASTM D955 | 0.040-0.10 % | |
| MD:24hr | ISO 294-4 | 0.040-0.10 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.031 % |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/OCL-4036 |
|---|---|---|---|
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 15.1 J |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 6.3 kJ/m² |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 2.97 J | |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 31 kJ/m² |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE US/OCL-4036 |
|---|---|---|---|
| UL flame retardant rating | 1.8mm | UL 94 | V-0 |