Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPU PS455-218 HUNTSMAN GERMANY
IROGRAN®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | HUNTSMAN GERMANY/PS455-218 |
|---|---|---|---|
| Shore hardness | 邵氏A,注塑 | ASTM D2240 | 78 |
| ShoreA,InjectionMolded | DIN 53505 | 78 |
| Mechanical properties | Test Condition | Test Method | HUNTSMAN GERMANY/PS455-218 |
|---|---|---|---|
| wear resistance | -- | DIN 53516 | 50 mm³ |
| -- | ASTM D395 | 51 mm³ |
| elastomer | Test Condition | Test Method | HUNTSMAN GERMANY/PS455-218 |
|---|---|---|---|
| tear strength | 0.635mm | ASTM D624 | 66.5 kN/m |
| compression set | 23°C,70hr | ASTM D395 | 40 % |
| Tensile strain | Break,0.635mm | DIN 53504 | 700 % |
| compression set | 70°C,24hr | ASTM D395 | 90 % |
| Shore hardness | ASTM D2632 | 50 % | |
| tensile strength | Break,0.635mm | ASTM D412 | 41.4 Mpa |
| Break,0.635mm | DIN 53504 | 42.0 Mpa | |
| Tensile strain | Break,0.635mm | ASTM D412 | 700 % |
| compression set | 70°C,24hr | DIN 53517 | 90 % |
| 23°C,70hr | DIN 53517 | 40 % | |
| tensile strength | 100%Strain,0.635mm | DIN 53504 | 2.00 Mpa |
| tear strength | 0.635mm | DIN 53515 | 72 kN/m |
| tensile strength | 300%Strain,0.635mm | ASTM D412 | 4.83 Mpa |
| 300%Strain,0.635mm | DIN 53504 | 5.00 Mpa | |
| 100%Strain,0.635mm | ASTM D412 | 2.34 Mpa |
| physical property | Test Condition | Test Method | HUNTSMAN GERMANY/PS455-218 |
|---|---|---|---|
| Melt volume flow rate | 177°C/2.16kg | 8.00 cm3/10min |
| Thermal performance | Test Condition | Test Method | HUNTSMAN GERMANY/PS455-218 |
|---|---|---|---|
| TMA | High:635.0µm | 内部方法 | 130 °C |
| Low:635.0µm | 内部方法 | 110 °C |
Contact Us
Get App
Top