Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 70G13L DUPONT USA
Zytel®
Electrical field,Electronic field,Automotive sector,Bottle cap,sporting goods,Electrical appliances
Glass fiber reinforced,high strength,High rigidity,High temperature resistan
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | DUPONT USA/70G13L |
|---|---|---|---|
| Water absorption rate | 饱和(23℃) | ASTM D-570 | 7.1 % |
| Electrical performance | Test Condition | Test Method | DUPONT USA/70G13L |
|---|---|---|---|
| dielectric constant | ASTM D150/IEC 60250 | 150 |
| Mechanical properties | Test Condition | Test Method | DUPONT USA/70G13L |
|---|---|---|---|
| tensile strength | 23℃,50%RH | ASTM D-638 | 82.7 Mpa |
| Hardness (Rockwell R) | DAM | ASTM D-785 | R122 |
| Taber abraser | 50%RH | 12 cycles | |
| elongation at break | 23℃,50%RH | ASTM D-638 | 8 % |
| bending strength | 23℃,DAM | ASTM D-790 | 165 Mpa |
| elongation at break | 23℃,DAM | ASTM D-638 | 2 % |
| Flexural modulus | ASTM D790/ISO 178 | 4826 kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 165 kg·cm/cm(J/M)ft·lb/in | |
| elongation at break | ASTM D638/ISO 527 | 2 % | |
| tensile strength | ASTM D638/ISO 527 | 103.4 kg/cm²(MPa)[Lb/in²] | |
| Impact strength of cantilever beam gap | 23℃,DAM | ASTM D-256 | 48 J/m |
| Flexural modulus | 23℃,DAM | ASTM D-790 | 4826 Mpa |
| Hardness (Rockwell R) | 50%RH | ASTM D-785 | R113 |
| Hardness (Rockwell M) | 50%RH | ASTM D-785 | M84 |
| DAM | ASTM D-785 | M95 | |
| tensile strength | 23℃,DAM | ASTM D-638 | 103.4 Mpa |
| Squeezing shear strength | 23℃,DAM | ASTM D-732 | 76 Mpa |
| Flexural modulus | 23℃,50%RH | ASTM D-790 | 2758 Mpa |
| Impact strength of cantilever beam gap | 23℃,50%RH | ASTM D-256 | 53 J/m |
| other | Test Condition | Test Method | DUPONT USA/70G13L |
|---|---|---|---|
| characteristic | 注塑级.高强度13%玻纤 |
| Physical properties | Test Condition | Test Method | DUPONT USA/70G13L |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 1.2 % | |
| density | ASTM D792/ISO 1183 | 1.22 | |
| Water absorption rate | ASTM D570/ISO 62 | 7.1 % |
| Thermal performance | Test Condition | Test Method | DUPONT USA/70G13L |
|---|---|---|---|
| Combustibility (rate) | UL 94 | HB | |
| Heat distortion temperature | 1.8MPa，HDT | ASTM D-648 | 243 °C |
| Linear coefficient of thermal expansion | ASTM D-696 | 2.7×10 m/m/℃ | |
| melting temperature | DAM | ASTM D-789 | 255 °C |
| 50%RH | ASTM D-789 | 255 °C | |
| 255 ℃（℉） | |||
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 2.7×10-5 mm/mm.℃ |
Contact Us
Get App
Top