Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 TSG-30/4 EMS-CHEMIE USA
Grilon®
Automotive Applications
Thermal stability,Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Other performance | Test Condition | Test Method | EMS-CHEMIE USA/TSG-30/4 |
---|---|---|---|
Flammability level | UL 94 | 干燥|V-0 |
thermal performance | Test Condition | Test Method | EMS-CHEMIE USA/TSG-30/4 |
---|---|---|---|
Continuous use temperature | --3 | ISO 2578 | 干燥|100 -120 °C |
--4 | Internal Method | 干燥|220 °C | |
Hot deformation temperature | 8.0 MPa, Unannealed | ISO 75-2/C | 干燥|165 °C |
1.8 MPa, Unannealed | ISO 75-2/A | 干燥|235 °C | |
Melting temperature | ISO 11357-3 | 干燥|260 °C |
mechanical properties | Test Condition | Test Method | EMS-CHEMIE USA/TSG-30/4 |
---|---|---|---|
Ball Pressure Test | ISO 2039-1 | 调节后|130 Mpa | |
Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 调节后|8.5 kJ/m² |
23°C | ISO 179/1eA | 调节后|14 kJ/m² | |
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 调节后|60 kJ/m² |
23°C | ISO 179/1eU | 调节后|70 kJ/m² | |
Tensile modulus | ISO 527-2 | 调节后|6500 Mpa | |
Tensile strain | Break | ISO 527-2 | 调节后|4.5 % |
tensile strength | Break | ISO 527-2 | 调节后|90.0 Mpa |
Electrical performance | Test Condition | Test Method | EMS-CHEMIE USA/TSG-30/4 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | V | |
Dielectric strength | IEC 60243-1 | 调节后|26 KV/mm | |
Surface resistivity | IEC 60093 | 调节后|1.0E+10 ohms | |
Volume resistivity | IEC 60093 | 干燥|1.0E+12 ohms·cm |
Physical properties | Test Condition | Test Method | EMS-CHEMIE USA/TSG-30/4 |
---|---|---|---|
Shrinkage rate | MD | ISO 294-4 | 干燥|0.20 % |
TD | ISO 294-4 | 干燥|0.70 % | |
Water absorption rate | Saturation, 23°C | ISO 62 | 干燥|4.0 % |
Equilibrium, 23°C, 50% RH | ISO 62 | 干燥|1.5 % |