plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM EB-10 JAPAN POLYPLASTIC
DURACON®
Profile
Antistatic,Conductive
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/EB-10
ColourNumberCD3501
hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/EB-10
Rockwell hardnessM-ScaleISO 2039-295
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/EB-10
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A95.0 °C
Linear coefficient of thermal expansionMD:23to55°CInternal Method1.1E-04 cm/cm/°C
TD:23to55°CInternal Method1.1E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/EB-10
Bending modulusISO 1783000 Mpa
bending strengthISO 17895.0 Mpa
Friction coefficientDynamic2JISK72180.36
Steel - Dynamic3JISK72180.52
Tensile modulusISO 527-23300 Mpa
Tensile strainBreakISO 527-23.0 %
tensile strengthISO 527-255.0 Mpa
Wear factor0.98MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.98MPa,0.30m/sec5JISK721860 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK7218200 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK72185700 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/EB-10
Surface resistivityInternal Method2E+02 ohms
Volume resistivityInternal Method50 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/EB-10
densityISO 11831.43 g/cm³
melt mass-flow rate190°C/2.16kgISO 11331.5 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11331.20 cm3/10min
Shrinkage rateTD:2.00mmISO 294-41.8 %
MD:2.00mmISO 294-42.0 %
Water absorption rate23°C,24hrISO 620.80 %
impact performanceTest ConditionTest MethodJAPAN POLYPLASTIC/EB-10
Charpy Notched Impact Strength23°CISO 179/1eA1.8 kJ/m²
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/EB-10
UL flame retardant ratingUL 94HB