Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PFA MFA 1041 SOLVAY USA
HYFLON®
Electric wire,Cable Applications
Flame retardant,Conductive
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | SOLVAY USA/MFA 1041 |
|---|---|---|---|
| latent heat | J/g | NFPA 259 970 | |
| UL flame retardant rating | UL 94 | V-0 |
| Basic Performance | Test Condition | Test Method | SOLVAY USA/MFA 1041 |
|---|---|---|---|
| melt mass-flow rate | 372℃/5.0kg | ASTM D-1238 | 25 g/10min |
| thermal performance | Test Condition | Test Method | SOLVAY USA/MFA 1041 |
|---|---|---|---|
| Linear coefficient of thermal expansion | Flow | ASTM D-696 | 0.00016 cm/cm/℃ |
| Melting heat | DSC | 18-26 J/g | |
| Melting temperature | ASTM D-3307 | 280-290 ℃ | |
| specific heat | 23℃ | DSC | 1000 J/kg/℃ |
| thermal conductivity | 40℃ | ASTM C-177 | 0.2 W/m/K |
| mechanical properties | Test Condition | Test Method | SOLVAY USA/MFA 1041 |
|---|---|---|---|
| Charpy Notched Impact Strength | ASTM D-256 | No Break | |
| Elongation at Break | 23℃ | ASTM D-1708 | >280 % |
| Shore hardness | Shore D | ASTM D-2240 | 58 |
| Tensile modulus | 23℃ | ASTM D-1708 | 550 MPa |
| tensile strength | 23℃,Break | ASTM D-1708 | >20 MPa |
| Electrical performance | Test Condition | Test Method | SOLVAY USA/MFA 1041 |
|---|---|---|---|
| compressive strength | ASTM D-149 | 38 kV/mm | |
| Dielectric constant | 23℃,9E+8Hz | ASTM D-150 | 2 |
| 23℃,1E+6Hz | ASTM D-150 | 2 | |
| 23℃,2E+9Hz | ASTM D-150 | 2 | |
| Dissipation factor | 23℃,1E+6Hz | ASTM D-150 | 0.0002 |
| 23℃,9E+8Hz | ASTM D-150 | 0.0002 | |
| 23℃,2E+9Hz | ASTM D-150 | 0.0002 | |
| Surface resistivity | ASTM D-257 | >1.0E+17 ohms | |
| Volume resistivity | ASTM D-257 | >1.0E+17 ohm·cm |