Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC 940-701 SABIC INNOVATIVE NANSHA
LEXAN™
Automotive sector、Bottle cap
Flame retardant、Medium viscosity、Low toxicity、 Medium viscosity
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/940-701 |
---|---|---|---|
Water absorption rate | ASTM D-570 | 0.15 % | |
melt mass-flow rate | ASTM D-1238 | 7 g/10min |
Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/940-701 |
---|---|---|---|
elongation | 断裂 | ASTM D-638 | 90 % |
tensile strength | 屈服点 | ASTM D-638 | 62 Mpa |
断裂点 | ASTM D-638 | 56 Mpa | |
Impact strength of cantilever beam gap | 23°C | ASTM D-256 | 640 J/m |
bending strength | ASTM D-790 | 91 Mpa | |
Rockwell hardness | ASTM D-785 | 118 | |
Flexural modulus | ASTM D-790 | Mpa MPa |
Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/940-701 |
---|---|---|---|
Dissipation Factor | 1MHz | ASTM D-150 | 0.01 |
dielectric constant | 60Hz | ASTM D-150 | 3.01 |
Volume resistivity | ASTM D-257 | 1.0×10 Ω.cm | |
dielectric constant | 1MHz | ASTM D-150 | 2.96 |
Dissipation Factor | 60Hz | ASTM D-150 | 0.0009 |
physical property | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/940-701 |
---|---|---|---|
density | ASTM D-792 | 1.21 | |
UL flame retardant rating | UL 94 | 3.0 mm | |
UL 94 | V-2 | ||
Shrinkage rate | 3.2mm | ASTM D-955 | 5-7 10 |
Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/940-701 |
---|---|---|---|
Heat distortion temperature | 1.8MPa,HDT | ASTM D-648 | 132 °C |
Linear coefficient of thermal expansion | ASTM E-831 | 6.8×10 1/°C | |
Heat distortion temperature | 0.45MPa,HDT | ASTM D-648 | 137 °C |
vicat | ASTM D-1525 | 151 °C | |
Long term use temperature | UL 746B | 120 °C |
Contact Us
Get App
Top