Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 7022IR MITSUBISHI ENGINEERING JAPAN
IUPILON™
Medical packaging
Low viscosity、transparent
UL
TDS
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7022IR |
|---|---|---|---|
| Surface Resistivity | ASTM D257/IEC 60093 | >1015 Ω | |
| dielectric constant | ASTM D150/IEC 60250 | 25.2 | |
| Dielectric loss | ASTM D150/IEC 60250 | 0.0092 | |
| Volume resistivity | ASTM D257/IEC 60093 | 4-016 Ω.cm |
| Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7022IR |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 880 kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 88.2 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 2.3 kg/cm²(MPa)[Lb/in²] | |
| elongation at break | ASTM D638/ISO 527 | 110 % | |
| Rockwell hardness | ASTM D785 | R120 | |
| tensile strength | ASTM D638/ISO 527 | 60.8 kg/cm²(MPa)[Lb/in²] |
| other | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7022IR |
|---|---|---|---|
| characteristic | 低粘度.易脱模用 | ||
| Color | 无色无味 | ||
| purpose | 适合通用制品和注塑吹塑制品 |
| Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7022IR |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.2 | |
| Water absorption rate | ASTM D570/ISO 62 | 0.15 % |
Contact Us
Get App
Top