Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA46 TS250F4D BK DSM JAPAN
Stanyl®
Electronic and electrical components
Glass fiber reinforced,Thermal stability,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | DSM JAPAN/TS250F4D BK |
|---|---|---|---|
| Hot deformation temperature | 0.45 MPa, Unannealed | ISO 75-2/B | 290 °C |
| 1.8 MPa, Unannealed | ISO 75-2/A | 290 °C | |
| Linear coefficient of thermal expansion | Across Flow | ISO 11359-2 | 6.0E-5 cm/cm/°C |
| Flow | ISO 11359-2 | 4.0E-5 cm/cm/°C | |
| Melting temperature | ISO 11357-3 | 295 °C | |
| RTI Elec | 0.67 mm | UL 746 | 130 °C |
| mechanical properties | Test Condition | Test Method | DSM JAPAN/TS250F4D BK |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 9200 Mpa | |
| Tensile strain | Break | ISO 527-2 | 2.5 % |
| tensile strength | Break | ISO 527-2 | 150 Mpa |
| Electrical performance | Test Condition | Test Method | DSM JAPAN/TS250F4D BK |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | PLC 3 | |
| Dielectric strength | IEC 60243-1 | 30 KV/mm | |
| Relative permittivity | 100 Hz | IEC 60250 | 4.30 |
| 1 MHz | IEC 60250 | 4.00 | |
| Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | DSM JAPAN/TS250F4D BK |
|---|---|---|---|
| density | ISO 1183 | 1.60 g/cm³ | |
| Shrinkage rate | 横向Flow | ISO 294-4 | 1.3 % |
| Flow | ISO 294-4 | 0.80 % | |
| Water absorption rate | Equilibrium, 23°C, 50% RH | ISO 62 | 1.7 % |
| impact performance | Test Condition | Test Method | DSM JAPAN/TS250F4D BK |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 10 kJ/m² |
| -30°C | ISO 179/1eA | 8.0 kJ/m² |
| flammability | Test Condition | Test Method | DSM JAPAN/TS250F4D BK |
|---|---|---|---|
| Flammability level | UL 94 | V-0 |