Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT 551-GT30S BK BRICI BEIJING
--
Large electronics suitable for high electrical per,Housing of electrical products
Mineral glass fiber fille,High electrical performan,This product has low warp,High rigidity,Excellent dielectric prop,Good surface gloss and ot,Mineral glass fiber fille,High electrical performan,This product has low warp,High rigidity,Excellent dielectric prop,Good surface gloss and ot
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | BRICI BEIJING/551-GT30S BK |
|---|---|---|---|
| Hot deformation temperature | 1.82MPa | ASTM D-648 | 170 °C |
| 1.82MPa | ISO 75f | 195 °C | |
| Linear coefficient of thermal expansion | -30-30℃ | ASTM D-696 | 2.2 10-5℃mm/mm/℃ |
| UL flame retardant rating | 1/8-1/32" | UL 94 | HB V-0 |
| flame retardant performance | Test Condition | Test Method | BRICI BEIJING/551-GT30S BK |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0(0.8mm) |
| mechanical properties | Test Condition | Test Method | BRICI BEIJING/551-GT30S BK |
|---|---|---|---|
| Bending modulus | ASTM D-790 | 5000 Mpa | |
| ISO 178 | 7*103 Mpa | ||
| bending strength | ISO 178 | 185 Mpa | |
| ASTM D-790 | 105 Mpa | ||
| Charpy Notched Impact Strength | Notched | ASTM D-256 | 7 kJ/m² |
| Unnotched | ASTM D-256 | 25 kJ/m² | |
| Notched | ISO 179(leA) | 9 kJ/m² | |
| elongation | Break | ISO 527 | 3.8 % |
| ASTM D-638 | 3.4 % | ||
| Impact strength of cantilever beam gap | 1/8" | ASTM D-256 | 50 J/m |
| Rockwell hardness | ASTM D-785 | 90 M Scale | |
| tensile strength | ISO 527 | 115 Mpa | |
| ASTM D-638 | 80 Mpa |
| Electrical performance | Test Condition | Test Method | BRICI BEIJING/551-GT30S BK |
|---|---|---|---|
| Arc resistance | IEC 61621 | -- sec | |
| ash content | 30 % | ||
| Compared to the anti leakage trace index | IEC 60112 | PLC 2 | |
| Dielectric constant | 106HZ | IEC 60250 | 3.4 |
| ASTM D-150 | 3.0 106Hz | ||
| Dielectric loss | 106HZ,Tangent | IEC 60250 | 1.8*10-2 |
| Dielectric strength | IEC 60243 | 31 KV/m | |
| 2mm | ASTM D-149 | 23 MV/m | |
| Dissipation factor | ASTM D-150 | 2.0×10-2 106Hz | |
| Volume resistivity | ASTM D-257 | 1014 Ω.cm | |
| IEC 60093 | 1*1014 Ω。m |
| Physical properties | Test Condition | Test Method | BRICI BEIJING/551-GT30S BK |
|---|---|---|---|
| density | ISO 1183 | 1.61 g/cm³ | |
| Shrinkage rate | ASTM D-955 | 0.3-0.5 % | |
| Water absorption rate | 23℃,24hr | ISO 62 | 0.09 % |
| processability | Test Condition | Test Method | BRICI BEIJING/551-GT30S BK |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.5-0.9 % | |
| Spiral flow length | -- CM |