Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS DP M201AS Ineos ABS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos ABS/DP M201AS |
|---|---|---|---|
| density | ISO 1183 | 1050 kg/m | |
| Melt volume flow rate | 220℃,10kg | ISO 1133 | 18.0 cm |
| Mechanical properties | Test Condition | Test Method | Ineos ABS/DP M201AS |
|---|---|---|---|
| Tensile strain | 屈服 | ISO 527-1 | 2.5 % |
| Tensile modulus | ISO 527-1 | 2400 MPa | |
| Tensile stress | 屈服 | ISO 527-1 | 47.0 MPa |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 19.0 KJ/m |
| -30℃ | ISO 179/1eA | 10.0 KJ/m | |
| 23℃ | ISO 179/1eU | 140 KJ/m | |
| -30℃ | ISO 179/1eU | 80.0 KJ/m | |
| fracture strain | ISO 527-1 | 0.00 % |
| Electrical performance | Test Condition | Test Method | Ineos ABS/DP M201AS |
|---|---|---|---|
| relative permittivity | 1000Hz | IEC 60250 | 2.90 |
| dielectric strength | IEC 60243-1 | 32 KV/mm | |
| relative permittivity | 100Hz | IEC 60250 | 3.10 |
| Dielectric loss | 100Hz | IEC 60250 | 0.0060 |
| Volume resistivity | IEC 60093 | 1E+13 ohm.m | |
| Dielectric loss | 1000Hz | IEC 60250 | 0.0080 |
| Thermal performance | Test Condition | Test Method | Ineos ABS/DP M201AS |
|---|---|---|---|
| Linear coefficient of thermal expansion | ISO 11359-1 | 0.000090 cm/cm℃ | |
| vicat | 50℃/h 50N | ISO 306 | 97.0 ℃ |
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-1 | 100 ℃ |
| 1.80MPa，HDT | ISO 75-1 | 96.0 ℃ |
Contact Us
Get App
Top