Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PI, TP RTP 4282 TFE 15 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 4282 TFE 15 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 110 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 800 J/m |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 4282 TFE 15 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.5 % |
| tensile strength | ASTM D638 | 159 MPa | |
| Tensile modulus | ASTM D638 | 13800 MPa | |
| Flexural modulus | ASTM D790 | 12400 MPa | |
| bending strength | ASTM D790 | 262 MPa |
| Electrical performance | Test Condition | Test Method | RTP US/RTP 4282 TFE 15 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+06 ohms·cm |
| flammability | Test Condition | Test Method | RTP US/RTP 4282 TFE 15 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | RTP US/RTP 4282 TFE 15 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.15 % |
| density | ASTM D792 | 1.46 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.20 % |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 4282 TFE 15 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 288 °C |
Contact Us
Get App
Top