Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC/PBT 1760T SABIC INNOVATIVE US

XENOY™

Automotive External Parts,Phone case,Shell

Chemical resistance,High mobility,Glass fiber reinforced,High impact resistance,Filler: Glass fiber reinf,11% filler by weight

Plastic Datasheets

hardness	Test Condition	Test Method	SABIC INNOVATIVE US/1760T
Ball Pressure Test	H358/30	ISO 2039-1	105 Mpa
Rockwell hardness	R-Sale	ISO 2039-2	113

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE US/1760T
0.45MPa, unannealed, 100mm span		ISO 75-2/Be	115 °C
1.8MPa, unannealed, 100mm span		ISO 75-2/Ae	105 °C
Ball Pressure Test	75°C	IEC 60695-10-2	Pass
Linear coefficient of thermal expansion	MD:23to80°C	ISO 11359-2	4E-05 cm/cm/°C
Linear coefficient of thermal expansion		TD:23to80°C	ISO 11359-2	1.1E-04 cm/cm/°C
thermal conductivity		ISO 8302	0.19 W/m/K

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE US/1760T
Bending modulus		ISO 178	4000 Mpa
bending strength		ISO 178	140 Mpa
Tensile modulus		ISO 527-2/1	4500 Mpa
Tensile strain	Break	ISO 527-2/5	3.0 %
tensile strength	Break	ISO 527-2/5	90.0 Mpa

Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE US/1760T
Dielectric strength	3.20mm,in Oil	IEC 60243-1	17 KV/mm
Dissipation factor	1MHz	IEC 60250	0.020
		50Hz	IEC 60250	2E-03
		60Hz	IEC 60250	2E-03
Relative permittivity	60Hz	IEC 60250	3.30
		1MHz	IEC 60250	3.10
		50Hz	IEC 60250	3.30
Surface resistivity		IEC 60093	>1.0E+15 ohms
Volume resistivity		IEC 60093	>1.0E+14 ohms·cm

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE US/1760T
density		ISO 1183	1.30 g/cm³
Melt Volume Flow Rate (MVR)	250°C/5.0kg	ISO 1133	14.0 cm3/10min
Shrinkage rate	MD1	Internal Method	0.50-0.90 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.15 %
Water absorption rate		Saturation,23°C	ISO 62	0.50 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE US/1760T
Charpy Notched Impact Strength	23°C	ISO 179/1eA	4.0 kJ/m²
Charpy Notched Impact Strength		-30°C	ISO 179/1eA	3.5 kJ/m²
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	3.0 kJ/m²
		23°C	ISO 180/1A	3.0 kJ/m²
		0°C	ISO 180/1A	3.0 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	35 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	35 kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	30 kJ/m²
Suspended wall beam without notch impact strength		-30°C	ISO 180/1U	30 kJ/m²

flammability	Test Condition	Test Method	SABIC INNOVATIVE US/1760T
UL flame retardant rating	1.50mm	UL 94	HB

Get App

Top