Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS D-190 ZHENJIANG CHIMEI
POLYLAC®
Lighting fixtures,Electronic field,Electrical field
currency
UL
MSDS
SGS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | ZHENJIANG CHIMEI/D-190 |
|---|---|---|---|
| melt mass-flow rate | 200℃5,000g | ASTM D-1238 | 2.1 g/10min |
| Mechanical properties | Test Condition | Test Method | ZHENJIANG CHIMEI/D-190 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 15(2.7) kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 790(11.660) kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 25000（35000） kg/cm²(MPa)[Lb/in²] | |
| tensile strength | 23℃（73°F） | ASTM D-638 | 486.4 Kg-cm |
| elongation | ASTM D638/ISO 527 | 15 % | |
| bending strength | 23℃（73°F） | ASTM D-790 | 827.7 Kg-cm |
| Impact strength of cantilever beam gap | 1/8“bar，23℃（73°F） | ASTM D-256 | - kg-cm/cm |
| Rockwell hardness | ASTM D785 | R-105 | |
| flexural coefficient | 23℃（73°F） | ASTM D-790 | 26102 Kg-cm |
| tensile strength | ASTM D638/ISO 527 | 500（7.090） kg/cm²(MPa)[Lb/in²] | |
| Impact strength of cantilever beam gap | 1/4“bar，23℃（73°F） | ASTM D-256 | 15.7 kg-cm/cm |
| Rockwell hardness | 23℃（73°F） | ASTM D-785 | 112.3 Mscale |
| other | Test Condition | Test Method | ZHENJIANG CHIMEI/D-190 |
|---|---|---|---|
| characteristic | 高刚性中冲击 |
| Physical properties | Test Condition | Test Method | ZHENJIANG CHIMEI/D-190 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.05 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 23 g/10min |
| physical property | Test Condition | Test Method | ZHENJIANG CHIMEI/D-190 |
|---|---|---|---|
| Shrinkage rate | 23℃（73°F） | ASTM D-955 | - % |
| Thermal performance | Test Condition | Test Method | ZHENJIANG CHIMEI/D-190 |
|---|---|---|---|
| Combustibility (rate) | UL 94 | 1/16"HB | |
| Heat distortion temperature | HDT | ASTM D648/ISO 75 | 88(190) ℃（℉） |
| combustibility | UL -94 | - | |
| Heat distortion temperature | 18.6kg/cm，HDT | ASTM D-648 | 90.5 ℃°F |
Contact Us
Get App
Top