plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 6485 COVESTRO GERMANY
Makrolon® 
Household appliances,Household appliances
transparent
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodCOVESTRO GERMANY/6485
Ball Pressure TestISO 2039-1115 Mpa
Supplementary InformationTest ConditionTest MethodCOVESTRO GERMANY/6485
Electrolytic corrosion23°CIEC 60426A1
thermal performanceTest ConditionTest MethodCOVESTRO GERMANY/6485
Ball Pressure Test136°CIEC 60695-10-2Pass
Glass transition temperatureISO 11357-2142 °C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B136 °C
1.8MPa,UnannealedISO 75-2/A124 °C
Linear coefficient of thermal expansionMD：23to55°CISO 11359-26.5E-05 cm/cm/°C
TD：23to55°CISO 11359-26.5E-05 cm/cm/°C
RTI Elec1.5mmUL 746125 °C
RTI Imp1.5mmUL 746115 °C
RTI Str1.5mmUL 746125 °C
thermal conductivity23°CISO 83020.20 W/m/K
Vicat softening temperature--ISO 306/B120145 °C
--ISO 306/B50144 °C
mechanical propertiesTest ConditionTest MethodCOVESTRO GERMANY/6485
Bending modulus23°CISO 1782400 Mpa
Bending strain23°CISO 1787.1 %
bending strength23°CISO 17898.0 Mpa
3.5%Strain,23°CISO 17874.0 Mpa
Nominal tensile fracture strain23°CISO 527-2/50>50 %
Tensile creep modulus1hrISO 899-12200 Mpa
1000hrISO 899-11900 Mpa
Tensile modulus23°CISO 527-2/12400 Mpa
Tensile strainYield,23°CISO 527-2/506.1 %
Break,23°CISO 527-2/50120 %
tensile strengthBreak,23°CISO 527-2/5065.0 Mpa
Yield,23°CISO 527-2/5066.0 Mpa
Electrical performanceTest ConditionTest MethodCOVESTRO GERMANY/6485
Compared to the anti leakage trace indexSolutionBIEC 60112PLC 4
SolutionAIEC 60112PLC 3
Dielectric strength23°C,1.00mmIEC 60243-134 KV/mm
Dissipation factor23°C,100HzIEC 602508E-04
23°C,1MHzIEC 602509E-03
Relative permittivity23°C,1MHzIEC 602503.00
23°C,100HzIEC 602503.10
Surface resistivityIEC 600931E+16 ohms
Volume resistivity23°CIEC 600931E+16 ohms·cm
Physical propertiesTest ConditionTest MethodCOVESTRO GERMANY/6485
Apparent densityISO 600.64 g/cm³
density23°CISO 11831.20 g/cm³
melt mass-flow rate300°C/1.2kgISO 113310 g/10min
Melt Volume Flow Rate (MVR)300°C/1.2kgISO 11339.00 cm3/10min
Shrinkage rateMD:2.00mm3ISO 294-40.65 %
TDISO 25770.60-0.80 %
TD:2.00mm3ISO 294-40.70 %
MDISO 25770.60-0.80 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.12 %
Saturation,23°CISO 620.30 %
impact performanceTest ConditionTest MethodCOVESTRO GERMANY/6485
Charpy Notched Impact Strength23°C,Partial BreakISO 739170 kJ/m²
-30°C,Complete BreakISO 739114 kJ/m²
Impact strength of cantilever beam gap23°C,Partial BreakISO 739165 kJ/m²
-30°C,Complete BreakISO 739112 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eUNoBreak
23°CISO 179/1eUNoBreak
-60°CISO 179/1eUNoBreak
Multi axis Instrumented Impact Energy-30°CISO 6603-255.0 J
23°CISO 6603-250.0 J
Multi axis Instrumented Peak Impact Force-30°CISO 6603-26000 N
23°CISO 6603-25200 N
flammabilityTest ConditionTest MethodCOVESTRO GERMANY/6485
ApplicationofFlamefromSmallBurner MethodKandF2.00mmDIN 53438-1,-3K1.F1
Burning rate - US-FMVSS>1.00mmISO 3795passed
Burning wire flammability index0.75mmIEC 60695-2-12960 °C
3.0mmIEC 60695-2-12960 °C
1.5mmIEC 60695-2-12960 °C
Extreme Oxygen IndexISO 4589-236 %
FlashIgnitionTemperatureASTM D1929460 °C
GlowWireTest3.00mmEDFHN60E.02750 °C
1.50mmEDFHN60E.02750 °C
Hot filament ignition temperature3.0mmIEC 60695-2-13875 °C
1.5mmIEC 60695-2-13875 °C
0.75mmIEC 60695-2-13875 °C
Needle flame testMethodF:3.00mmIEC 60695-11-52.0 min
MethodK:1.50mmIEC 60695-11-52.0 min
MethodF:1.50mmIEC 60695-11-52.0 min
MethodF:2.00mmIEC 60695-11-52.0 min
MethodK:3.00mmIEC 60695-11-52.0 min
MethodK:2.00mmIEC 60695-11-52.0 min
SelfIgnitionASTM D1929540 °C
UL flame retardant rating0.75mmUL 94V-1
3.0mmUL 945VA
1.5mmUL 94V-0

Contact Us

Get App

Top