Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 301-4 Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Trinseo/301-4 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 80 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 940 J/m |
| hardness | Test Condition | Test Method | Trinseo/301-4 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 118 |
| Electrical performance | Test Condition | Test Method | Trinseo/301-4 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 2 | |
| dielectric strength | ASTM D149 | 20 kV/mm | |
| Volume resistivity | IEC 60093 | 3E+16 ohms·cm | |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| arc resistance | ASTM D495 | 110 sec |
| Mechanical properties | Test Condition | Test Method | Trinseo/301-4 |
|---|---|---|---|
| bending strength | -- | ASTM D790 | 89.0 MPa |
| tensile strength | -- | ASTM D638 | 62.0 MPa |
| -- | ISO 527-2 | 60.0 MPa | |
| elongation | 断裂 | ASTM D638 | 130 % |
| Tensile modulus | ISO 527-2 | 2300 MPa | |
| Flexural modulus | -- | ISO 178 | 2300 MPa |
| bending strength | -- | ISO 178 | 85.0 MPa |
| Flexural modulus | -- | ASTM D790 | 2200 MPa |
| elongation | 断裂 | ISO 527-2 | 110 % |
| optical performance | Test Condition | Test Method | Trinseo/301-4 |
|---|---|---|---|
| transmissivity | ASTM D1003 | 89.0 % | |
| refractive index | ASTM D542 | 1.585 |
| flammability | Test Condition | Test Method | Trinseo/301-4 |
|---|---|---|---|
| UL flame retardant rating | 0.44mm | UL 94 | V-2 |
| 0.75mm | UL 94 | V-2 | |
| 3.0mm | UL 94 | HB | |
| 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Trinseo/301-4 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.50to0.70 % |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 % |
| Melt volume flow rate | 300°C/1.2kg | ISO 1133 | 4.00 cm³/10min |
| Shrinkage rate | TD | ASTM D955 | 0.50to0.70 % |
| density | ISO 1183 | 1.20 g/cm³ |
| Thermal performance | Test Condition | Test Method | Trinseo/301-4 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 135 °C |
| Linear coefficient of thermal expansion | TD | ASTM D696 | 7E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 141 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 130 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 7E-05 cm/cm/°C |
Contact Us
Get App
Top