plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS PA-709 TAIWAN CHIMEI
POLYLAC® 
Automotive sector
High impact resistance,Low temperature resistanc
MSDSRoHSULTDSTDSULMSDSRoHSSVHCProcessingStatementREACH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

machinabilityTest ConditionTest MethodTAIWAN CHIMEI/PA-709
Dry conditions80°C下烘料约2-3小时
Melt Temperature- °C
Mold temperature30-70 °C
pressure- Mpa
Processing temperature180-230°C °C
Screw speed- rpm
thermal performanceTest ConditionTest MethodTAIWAN CHIMEI/PA-709
Combustibility (rate)UL 941.6mmHB
Hot deformation temperatureHDTASTM D648/ISO 7588（190） ℃（℉）
Linear coefficient of thermal expansionASTM D696/ISO 11359- mm/mm.℃
Vicat softening temperatureASTM D1525/ISO R306105（221） ℃（℉）
mechanical propertiesTest ConditionTest MethodTAIWAN CHIMEI/PA-709
Bending modulusASTM D790/ISO 17823000（32000） kg/cm²(MPa)[Lb/in²]
bending strengthASTM D790/ISO 178640（9.070） kg/cm²(MPa)[Lb/in²]
Charpy Notched Impact StrengthASTM D256/ISO 179- kg·cm/cm(J/M)ft·lb/in
elongationASTM D638/ISO 52740 %
Elongation at BreakASTM D638/ISO 527- %
Impact strength of cantilever beam gapASTM D256/ISO 17945（8.4） kg·cm/cm(J/M)ft·lb/in
Rockwell hardnessASTM D785R-102
Tensile modulusASTM D638/ISO 527- kg/cm²(MPa)[Lb/in²]
tensile strengthASTM D638/ISO 527400（5.670） kg/cm²(MPa)[Lb/in²]
otherTest ConditionTest MethodTAIWAN CHIMEI/PA-709
characteristic超高耐冲击强度押管用。
purpose水管配件 / 汽车前后扰流板 / 摩托车挡板 / 押出水管 / 安全帽
remarks在射出周期中勿将热融胶长期停留在加热管中
Physical propertiesTest ConditionTest MethodTAIWAN CHIMEI/PA-709
densityASTM D792/ISO 11831.03
melt mass-flow rateASTM D1238/ISO 11335 g/10min
Shrinkage rateASTM D955- %
Water absorption rateASTM D570/ISO 62- %

Contact Us

Get App

Top