Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 3414R-731 SABIC INNOVATIVE US
LEXAN™
Fiber grade
Flame retardant、enhance、Glass fiber reinforced、High rigidity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | SABIC INNOVATIVE US/3414R-731 |
|---|---|---|---|
| Vicat Softening Temperature | ASTMD15255 | 166 °C | |
| Heat Deflection Temperature | 1.8MPa,未退火,6.40mm | ASTMD648 | 146 °C |
| Specific Heat | ASTMC351 | 1050 J/kg/°C | |
| RTIElec | UL746 | 130 °C | |
| Thermal Conductivity | ASTMC177 | 0.22 W/m/K | |
| RTIStr | UL746 | 130 °C | |
| Evolution Calendar intelligent importer | UL746 | 130 °C | |
| Linear thermal expansion coefficient | MD：-40到95°C | ASTME831 | 1.6E-05 cm/cm/°C |
| Heat Deflection Temperature | 0.45MPa,未退火,6.40mm | ASTMD648 | 154 °C |
| Hardness | Test Condition | Test Method | SABIC INNOVATIVE US/3414R-731 |
|---|---|---|---|
| Rockwell Hardness | M计秤 | ASTMD785 | 93 |
| R计秤 | ASTMD785 | 119 |
| Physical | Test Condition | Test Method | SABIC INNOVATIVE US/3414R-731 |
|---|---|---|---|
| Moisture Absorption | 24hr | ASTMD570 | 0.12 % |
| Modeling Shrinkage | MD：3.20mm | 内部方法 | 0.10to0.20 % |
| Moisture Absorption | 平衡,23°C | ASTMD570 | 0.23 % |
| Specific Volume | ASTMD792 | 0.658 cm³/g | |
| Melt Mass-Flow Rate | 300°C/5.0kg | ASTMD1238 | 13 g/10min |
| Mechanical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/3414R-731 |
|---|---|---|---|
| Flexural Modulus | 50.0mm跨距 | ASTMD790 | 9650 Mpa |
| Flexural Strength | 屈服,50.0mm跨距 | ASTMD790 | 186 Mpa |
| Tensile Elongation | 断裂 | ASTMD638 | 3.0 % |
| Tensile Strength | 断裂 | ASTMD638 | 125 Mpa |
| Taber Abrasion Resistance | 1000Cycles,1000g,CS-17转轮 | ASTMD1044 | 32.0 mg |
| Impact Properties | Test Condition | Test Method | SABIC INNOVATIVE US/3414R-731 |
|---|---|---|---|
| Gardner Impact | 23°C | ASTMD3029 | 6.78 J |
| Tensile Impact Strength | ASTMD1822 | 67.2 kJ/m² |
| Flammability | Test Condition | Test Method | SABIC INNOVATIVE US/3414R-731 |
|---|---|---|---|
| Flame Rating | 3.0mm | UL94 | V-0 |
| 1.1mm | UL94 | V-1 |
| Electrical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/3414R-731 |
|---|---|---|---|
| Dissipation Factor? | 50Hz | ASTMD150 | 1.3E-03 |
| 60Hz | ASTMD150 | 1.3E-03 | |
| 1MHz | ASTMD150 | 6.7E-03 | |
| Hot-wire Ignition | HWI | UL746 | PLC 0 |
| High Amp Arc Ignition | HAI | UL746 | PLC 4 |
| Volume Resistivity | ASTMD257 | >1.0E+17 ohms·cm | |
| High Voltage Arc Tracking Rate | HVTR | UL746 | PLC 3 |
| Dielectric Constant | 60Hz | ASTMD150 | 3.53 |
| 50Hz | ASTMD150 | 3.53 | |
| 1MHz | ASTMD150 | 3.48 | |
| Arc Resistance | ASTMD495 | PLC7 | |
| Dielectric Strength | 3.20mm,inAir | ASTMD149 | 18 KV/mm |
| Comparative Tracking Index | CTI | UL746 | PLC 4 |
Contact Us
Get App
Top