Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS FZ-3600-H5 BK DIC JAPAN
DIC.PPS
Electrical field、Electronic field、Household appliances、Household appliances、Automotive sector
High temperature resistan、enhance、Glass fiber reinforced、filling、Filler: Glass mineral
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | DIC JAPAN/FZ-3600-H5 BK |
---|---|---|---|
Rockwell hardness | ASTM D785 | 100 M(Scale) | |
ASTM D785 | 121 R |
Electrical performance | Test Condition | Test Method | DIC JAPAN/FZ-3600-H5 BK |
---|---|---|---|
Dissipation Factor | 耐电弧性 | ASTM D495 | 180 S |
23°C | ASTM D150 | 8E-03 1MHz | |
Volume resistivity | ASTM D257 | 1E+16 Ω.cm | |
dielectric strength | 1.60mm | ASTM D149 | 16 KV/mm |
dielectric constant | 23°C | ASTM D150 | 5.0 1MHz |
Dissipation Factor | 相对漏电起痕指数 | ASTM D3638 | 250 V |
Mechanical properties | Test Condition | Test Method | DIC JAPAN/FZ-3600-H5 BK |
---|---|---|---|
Tensile modulus | 泊松比 | 7.58 0.34 | |
Impact strength of cantilever beam gap | 23°C | ASTM D256 | 75 J/m |
coefficient of friction | 静态 | ASTM D3702 | 0.35 |
bending strength | 23°C | ASTM D790 | 230 Mpa |
Tensile modulus | 23°C | ASTM D638 | 18500 Mpa |
elongation at break | 23°C | ASTM D638 | 1.0 % |
coefficient of friction | 动态 | ASTM D3702 | 0.35 |
Flexural modulus | 23°C | ASTM D790 | 17500 Mpa |
tensile strength | 23°C | ASTM D638 | 150 Mpa |
Flame retardant performance | Test Condition | Test Method | DIC JAPAN/FZ-3600-H5 BK |
---|---|---|---|
UL flame retardant rating | UL -94 | V-0 0.40mm | |
UL -94 | V-0 0.80mm |
physical property | Test Condition | Test Method | DIC JAPAN/FZ-3600-H5 BK |
---|---|---|---|
Shrinkage rate | MD | ASTM D995 | 0.25 % |
Water absorption rate | (23°C,24hr) | ASTM D570 | 0.02 % |
Shrinkage rate | TD | ASTM D995 | 1.00 % |
Thermal performance | Test Condition | Test Method | DIC JAPAN/FZ-3600-H5 BK |
---|---|---|---|
Linear coefficient of thermal expansion | TD | ASTM D696 | 1.7E-05 cm/cm/°C |
Heat distortion temperature | 1.80MPa未退火,HDT | ASTM D648 | 265 °C |
Linear coefficient of thermal expansion | MD | ASTM D696 | 1.7E-05 cm/cm/°C |
Contact Us
Get App
Top