Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+ABS KEBALLOY® EP 23 BARLOG plastics GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | BARLOG plastics GmbH/KEBALLOY® EP 23 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 35 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 无断裂 |
| Electrical performance | Test Condition | Test Method | BARLOG plastics GmbH/KEBALLOY® EP 23 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 35 kV/mm | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| Surface Resistivity | IEC 60093 | 1E+15 ohms |
| Mechanical properties | Test Condition | Test Method | BARLOG plastics GmbH/KEBALLOY® EP 23 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2300 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | >25 % |
| 屈服 | ISO 527-2 | 3.5 % | |
| tensile strength | 屈服 | ISO 527-2 | 50.0 MPa |
| flammability | Test Condition | Test Method | BARLOG plastics GmbH/KEBALLOY® EP 23 |
|---|---|---|---|
| Flammability level | IEC 60695-11-10,-20 | HB |
| physical property | Test Condition | Test Method | BARLOG plastics GmbH/KEBALLOY® EP 23 |
|---|---|---|---|
| melt mass-flow rate | 240°C/5.0kg | ISO 1133 | 10 g/10min |
| density | ISO 1183 | 1.12 g/cm³ | |
| Water absorption rate | 平衡,23°C,50%RH | 内部方法 | 0.20 % |
| Thermal performance | Test Condition | Test Method | BARLOG plastics GmbH/KEBALLOY® EP 23 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 92.0 °C |
Contact Us
Get App
Top