Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC ML-1105 TEIJIN JAPAN
PANLITE®
Casters
transparent,Food contact compliance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | TEIJIN JAPAN/ML-1105 |
|---|---|---|---|
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 141 ℃(℉) |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.000070 mm/mm.℃ | |
| Vicat softening temperature | ASTM D1525/ISO R306 | 148 ℃(℉) |
| mechanical properties | Test Condition | Test Method | TEIJIN JAPAN/ML-1105 |
|---|---|---|---|
| Bending modulus | ASTM D790/ISO 178 | 2300 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 96.0 kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 6.0 % | |
| Elongation at Break | ASTM D638/ISO 527 | 50 % | |
| Tensile modulus | ASTM D638/ISO 527 | 2400 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 66.0 kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | TEIJIN JAPAN/ML-1105 |
|---|---|---|---|
| Surface resistivity | ASTM D257/IEC 60093 | 1.0E+15 Ω | |
| Volume resistivity | ASTM D257/IEC 60093 | 1.0E+15 Ω.cm |
| other | Test Condition | Test Method | TEIJIN JAPAN/ML-1105 |
|---|---|---|---|
| remarks | 以上加工数据.为参考值.以生产厂商设备的实际状况而进行调整 |
| Physical properties | Test Condition | Test Method | TEIJIN JAPAN/ML-1105 |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.50-0.70 % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.20 % |