Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT B 4406 BASF GERMANY
Ultradur®
Electrical components,switch,Laptop case
Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | BASF GERMANY/B 4406 |
---|---|---|---|
Combustibility (rate) | UL 94 | V-0 | |
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 80.0 °C |
0.45MPa,Unannealed | ISO 75-2/B | 170 °C | |
1.8MPa,Unannealed | ISO 75-2/A | 60.0 °C | |
0.45MPa,Unannealed | ASTM D648 | 165 °C | |
Linear coefficient of thermal expansion | MD | ASTME831 | 9E-05 cm/cm/°C |
ASTM D696/ISO 11359 | 1500 mm/mm.℃ | ||
MD | 5.5E-05 cm/cm/°C | ||
Melting temperature | ASTM D3418 | 223 °C | |
ISO 3146 | 223 °C | ||
RTI Elec | 3.0mm | UL 746 | 125 °C |
0.75mm | UL 746 | 125 °C | |
1.5mm | UL 746 | 125 °C | |
RTI Imp | 1.5mm | UL 746 | 130 °C |
3.0mm | UL 746 | 130 °C | |
0.75mm | UL 746 | 130 °C | |
RTI Str | 3.0mm | UL 746 | 140 °C |
1.5mm | UL 746 | 140 °C | |
0.75mm | UL 746 | 140 °C |
mechanical properties | Test Condition | Test Method | BASF GERMANY/B 4406 |
---|---|---|---|
elongation | Yield,23°C | ASTM D638 | 3.9 % |
Nominal tensile fracture strain | -40°C | ISO 527-2 | 3.3 % |
23°C | ISO 527-2 | 3.5 % | |
Tensile creep modulus | 1hr | ISO 899-1 | 1800 Mpa |
Tensile modulus | ASTM D638/ISO 527 | 3000 kg/cm²(MPa)[Lb/in²] | |
23°C | ISO 527-2 | 3000 Mpa | |
Tensile strain | Yield,23°C | ISO 527-2 | 3.9 % |
tensile strength | Yield,23°C | ASTM D638 | 65.0 Mpa |
Yield,23°C | ISO 527-2 | 65.0 Mpa |
Electrical performance | Test Condition | Test Method | BASF GERMANY/B 4406 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 2 | |
Dielectric constant | 1MHz | IEC 60250 | 3.30 |
100Hz | IEC 60250 | 3.30 | |
Dissipation factor | 1MHz | IEC 60250 | 0.017 |
100Hz | IEC 60250 | 0.011 | |
Surface resistivity | IEC 60093 | 1E+13 ohms | |
Volume resistivity | 1.50mm | ASTM D257 | 1E+13 ohms |
IEC 60093 | >1.0E+15 ohms·cm | ||
1.50mm | ASTM D257 | >1.0E+15 ohms·cm | |
ASTM D257/IEC 60093 | 1E 14 Ω.cm |
other | Test Condition | Test Method | BASF GERMANY/B 4406 |
---|---|---|---|
purpose | 高刚度和强度、尺寸稳定性、低吸水率和耐化学性.耐侯性和抗热老化性;应用于高性能领域.如不同工业部门中的承重部分 |
Physical properties | Test Condition | Test Method | BASF GERMANY/B 4406 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1450 | |
Melt Volume Flow Rate (MVR) | 250°C/2.16kg | ISO 1133 | 30.0 cm3/10min |
Shrinkage rate | MD:3.18mm | 0.15 % | |
Viscosity value | 降低的粘度 | ISO 1628 | 122.0 ml/g |
Water absorption rate | Saturation | ASTM D570 | 0.40 % |
Equilibrium,23°C,50%RH | ISO 62 | 0.25 % | |
Equilibrium,50%RH | ASTM D570 | 0.25 % | |
Saturation,23°C | ISO 62 | 0.40 % | |
ASTM D570/ISO 62 | 0.4 % |
impact performance | Test Condition | Test Method | BASF GERMANY/B 4406 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179 | 50 kJ/m² |
flammability | Test Condition | Test Method | BASF GERMANY/B 4406 |
---|---|---|---|
UL flame retardant rating | 0.75mm | UL 94 | V-0 |
3.0mm | UL 94 | V-0 | |
1.5mm | UL 94 | V-0 | |
0.40mm | UL 94 | V-0 |