Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ASA 778 UV WT168 USA TPC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | USA TPC/778 UV WT168 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D-648 | 103 ℃ |
| 0.45MPa,Unannealed | ASTM D-648 | 106 ℃ | |
| Linear coefficient of thermal expansion | Flow | ASTM D-696 | 0.000070 cm/cm/℃ |
| UL flame retardant rating | UL 94 | HB |
| mechanical properties | Test Condition | Test Method | USA TPC/778 UV WT168 |
|---|---|---|---|
| Bending modulus | ASTM D-790 | 2140 MPa | |
| bending strength | ASTM D-790 | 40.7 MPa | |
| Elongation at Break | ASTM D-638 | 8.0 % | |
| Impact strength of cantilever beam gap | 23℃,3.18mm | ASTM D-256 | 240 J/m |
| Rockwell hardness | ASTM D-785 | 108 L-Scale | |
| tensile strength | Yield | ASTM D-638 | 49.0 MPa |
| Electrical performance | Test Condition | Test Method | USA TPC/778 UV WT168 |
|---|---|---|---|
| Dielectric strength | ASTM D-149 | 16 KV/mm | |
| Volume resistivity | ASTM D-257 | 5E+13 ohm.cm |
| Physical properties | Test Condition | Test Method | USA TPC/778 UV WT168 |
|---|---|---|---|
| density | ASTM D-792 | 1.07 g/cm3 | |
| melt mass-flow rate | Flow | ASTM D-955 | 0.70 g/10min |
| Water absorption rate | 24hr | ASTM D-570 | 0.35 % |