Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PET X7507-NA9D032T SABIC INNOVATIVE US
XYLEX™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/X7507-NA9D032T |
|---|---|---|---|
| Dart impact | 23°C, Total Energy | ASTM D3763 | 79.0 J |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/X7507-NA9D032T |
|---|---|---|---|
| Tensile modulus | --2 | ASTM D638 | 2300 Mpa |
| tensile strength | 屈服3 | ASTM D638 | 61.0 Mpa |
| elongation | 断裂3 | ASTM D638 | 130 % |
| 断裂 | ISO 527-2/50 | 110 % | |
| Flexural modulus | --5 | ISO 178 | 2180 Mpa |
| bending strength | 屈服, 50.0 mm 跨距4 | ASTM D790 | 96.0 Mpa |
| --5,6 | ISO 178 | 92.0 Mpa | |
| Flexural modulus | 50.0 mm 跨距4 | ASTM D790 | 2320 Mpa |
| tensile strength | 断裂 | ISO 527-2/50 | 59.0 Mpa |
| 屈服 | ISO 527-2/50 | 62.0 Mpa | |
| elongation | 屈服 | ISO 527-2/50 | 5.4 % |
| 屈服3 | ASTM D638 | 6.0 % | |
| tensile strength | 断裂3 | ASTM D638 | 65.0 Mpa |
| Tensile modulus | -- | ISO 527-2/1 | 2660 Mpa |
| optical performance | Test Condition | Test Method | SABIC INNOVATIVE US/X7507-NA9D032T |
|---|---|---|---|
| transmissivity | 2540 µm | ASTM D1003 | > 85.0 % |
| Haze ratio | 2540 µm | ASTM D1003 | 1.6 % |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/X7507-NA9D032T |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 0.12 % |
| Melt volume flow rate | 265°C/2.16 kg | ISO 1133 | 5.00 cm3/10min |
| melt mass-flow rate | 265°C/2.16 kg | ASTM D1238 | 8.0 g/10 min |
| Water absorption rate | 饱和, 23°C | ISO 62 | 0.32 % |
| Shrinkage rate | 3.20 mm，Flow | 内部方法 | 0.50 - 0.80 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/X7507-NA9D032T |
|---|---|---|---|
| Linear coefficient of thermal expansion | 流动 : -40 到 40°C | ASTM E831 | 6.0E-5 cm/cm/°C |
| vicat | -- | ISO 306/B120 | 127 °C |
| -- | ASTM D15259 | 125 °C | |
| Linear coefficient of thermal expansion | 横向 : -40°C | ISO 11359-2 | 6.3E-5 cm/cm/°C |
| Heat distortion temperature | 1.8 MPa, 未退火, 4.00 mm, 64.0 mm 跨距8，HDT | ISO 75-2/Af | 105 °C |
| Linear coefficient of thermal expansion | 横向 : -40 到 40°C | ASTM E831 | 7.0E-5 cm/cm/°C |
| Heat distortion temperature | 1.8 MPa, 未退火, 3.20 mm，HDT | ASTM D648 | 104 °C |
| injection | Test Condition | Test Method | SABIC INNOVATIVE US/X7507-NA9D032T |
|---|---|---|---|
| screw speed | 20 to 100 rpm | ||
| Suggested maximum moisture content | 0.020 % | ||
| Processing (melt) temperature | 250 to 270 °C | ||
| drying temperature | 80 to 95 °C | ||
| Suggested injection volume | 40 to 80 % | ||
| drying time | 3.0 to 5.0 hr | ||
| Temperature in the middle of the barrel | 245 to 265 °C | ||
| Temperature at the rear of the barrel | 240 to 250 °C | ||
| Exhaust hole depth | 0.013 to 0.020 mm | ||
| Temperature at the front of the material cylinder | 250 to 270 °C | ||
| Back pressure | 0.200 to 0.500 Mpa | ||
| Temperature | 45 to 60 °C | ||
| Spray nozzle temperature | 250 to 270 °C |
Contact Us
Get App
Top