Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP ED213AE BOREALIS EUROPE
Daplen™
Car exterior decoration、Automotive External Parts、Application in the automo、Car exterior decoration、Automotive External Parts
High surface finish、filler、Mineral filler、20%、Filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | BOREALIS EUROPE/ED213AE |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 29 kJ/m² |
| -30°C | ISO 179/1eA | 4.5 kJ/m² | |
| Impact strength of cantilever beam gap | -20°C | ISO 180/1A | 8.0 kJ/m² |
| Charpy Notched Impact Strength | -20°C | ISO 179/1eA | 10 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 110 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 25 kJ/m² |
| Impact strength of simply supported beam without notch | -20°C | ISO 179/1eU | 44 kJ/m² |
| hardness | Test Condition | Test Method | BOREALIS EUROPE/ED213AE |
|---|---|---|---|
| ball-indentation hardness | H132/10 | ISO 2039-1 | 40.0 Mpa |
| Mechanical properties | Test Condition | Test Method | BOREALIS EUROPE/ED213AE |
|---|---|---|---|
| Tensile modulus | 注塑 | ISO 527-2/1 | 1750 Mpa |
| bending strength | 注塑 | ISO 178 | 24.0 Mpa |
| Tensile strain | 屈服,注塑 | ISO 527-2/50 | 4.0 % |
| Flexural modulus | 注塑 | ISO 178 | 1850 Mpa |
| tensile strength | 屈服,注塑 | ISO 527-2/50 | 17.0 Mpa |
| physical property | Test Condition | Test Method | BOREALIS EUROPE/ED213AE |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 0.60 % | |
| density | ISO 1183 | 1.02 g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 8.0 g/10min |
| Thermal performance | Test Condition | Test Method | BOREALIS EUROPE/ED213AE |
|---|---|---|---|
| MeltEnergy | ISO 11357 | 56.4 kJ/kg | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 102 °C |
| vicat | -- | ISO 306/A50 | 124 °C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 54.0 °C |
| vicat | -- | ISO 306/B50 | 40.0 °C |
| Linear coefficient of thermal expansion | MD：-30到80°C | 内部方法 | 7E-05 cm/cm/°C |
Contact Us
Get App
Top