Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PI, TP TECASINT™ 2021 ENSINGER GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ENSINGER GERMANY/TECASINT™ 2021 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ASTM D256 | 523 J/m |
| hardness | Test Condition | Test Method | ENSINGER GERMANY/TECASINT™ 2021 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 87 |
| Mechanical properties | Test Condition | Test Method | ENSINGER GERMANY/TECASINT™ 2021 |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 143 MPa |
| Tensile modulus | ASTM D638 | 4400 MPa | |
| Flexural modulus | 23°C | ASTM D790 | 4050 MPa |
| tensile strength | 屈服,23°C | ASTM D638 | 101 MPa |
| elongation | 断裂,23°C | ASTM D638 | 3.7 % |
| physical property | Test Condition | Test Method | ENSINGER GERMANY/TECASINT™ 2021 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 1.3 % |
| density | ASTM D792 | 1.46 g/cm³ |
| Thermal performance | Test Condition | Test Method | ENSINGER GERMANY/TECASINT™ 2021 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | >316 °C |
| Linear coefficient of thermal expansion | MD：-40到38°C | ASTM D696 | 4.1E-05 cm/cm/°C |
| maximum service temperature | LongTerm | 280 °C | |
| Intermittent | 330 °C |
Contact Us
Get App
Top