plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT T08 200 DSM HOLAND
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodDSM HOLAND/T08 200
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B170 °C
1.8MPa,UnannealedISO 75-2/A55.0 °C
Linear coefficient of thermal expansionTDISO 11359-29E-05 cm/cm/°C
MDISO 11359-29E-05 cm/cm/°C
Melting temperatureISO 11357-3225 °C
mechanical propertiesTest ConditionTest MethodDSM HOLAND/T08 200
Nominal tensile fracture strainISO 527-2>50 %
Tensile modulusISO 527-22550 Mpa
Tensile strainYieldISO 527-23.5 %
tensile strengthYieldISO 527-255.0 Mpa
Electrical performanceTest ConditionTest MethodDSM HOLAND/T08 200
Compared to the anti leakage trace indexIEC 60112 V
Dielectric strengthIEC 60243-127 KV/mm
Dissipation factor1MHzIEC 602500.020
100HzIEC 602502E-03
Relative permittivity100HzIEC 602503.50
1MHzIEC 602503.20
Volume resistivityIEC 60093>1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodDSM HOLAND/T08 200
Melt Volume Flow Rate (MVR)250°C/2.16kgISO 113310.0 cm3/10min
Water absorption rateEquilibrium,23°C,50%RHISO 620.18 %
Saturation,23°CISO 620.45 %
impact performanceTest ConditionTest MethodDSM HOLAND/T08 200
Impact strength of simply supported beam without notch-30°CISO 179/1eUNoBreak
23°CISO 179/1eUNoBreak
flammabilityTest ConditionTest MethodDSM HOLAND/T08 200
UL flame retardant rating0.75mmIEC 60695-11-10,-20HB
1.5mmIEC 60695-11-10,-20HB