Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PET Ensinger TECAPET ENSINGER GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ENSINGER GERMANY/Ensinger TECAPET |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 37 J/m |
| hardness | Test Condition | Test Method | ENSINGER GERMANY/Ensinger TECAPET |
|---|---|---|---|
| Rockwell hardness | M级,23°C | ASTM D785 | 94 |
| Mechanical properties | Test Condition | Test Method | ENSINGER GERMANY/Ensinger TECAPET |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 121 MPa |
| coefficient of friction | 与自身-动态2 | ASTM D1894 | 0.25 |
| Tensile modulus | ASTM D638 | 3240 MPa | |
| Flexural modulus | 23°C | ASTM D790 | 2960 MPa |
| Wear factor | 0.28MPa,0.25m/sec | ASTM D3702 | 420 10^-8mm³/N·m |
| tensile strength | 屈服,23°C | ASTM D638 | 86.2 MPa |
| elongation | 断裂,23°C | ASTM D638 | 20 % |
| coefficient of friction | 与自身-静态 | ASTM D1894 | 0.19 |
| Electrical performance | Test Condition | Test Method | ENSINGER GERMANY/Ensinger TECAPET |
|---|---|---|---|
| dielectric constant | 23°C,60Hz | ASTM D150 | 3.40 |
| Volume resistivity | ASTM D257 | 1E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 16 kV/mm | |
| Dissipation Factor | 23°C,60Hz | ASTM D150 | 2E-03 |
| flammability | Test Condition | Test Method | ENSINGER GERMANY/Ensinger TECAPET |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | ENSINGER GERMANY/Ensinger TECAPET |
|---|---|---|---|
| Water absorption rate | 饱和,23°C | ASTM D570 | 0.50 % |
| 23°C,24hr | ASTM D570 | 0.10 % | |
| density | ASTM D792 | 1.38 g/cm³ |
| Thermal performance | Test Condition | Test Method | ENSINGER GERMANY/Ensinger TECAPET |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 79.4 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 116 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 7E-05 cm/cm/°C |
| melting temperature | ASTM D3418 | 254 °C | |
| maximum service temperature | Intermittent | 160 °C | |
| specific heat | 1170 J/kg/°C | ||
| maximum service temperature | LongTerm | UL 746B | 110 °C |
Contact Us
Get App
Top