Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC PC/ABS 7880ECO Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Trinseo/PC/ABS 7880ECO |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 720 J/m |
| Mechanical properties | Test Condition | Test Method | Trinseo/PC/ABS 7880ECO |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 60 % |
| Flexural modulus | ASTM D790 | 2500 MPa | |
| tensile strength | 屈服 | ASTM D638 | 60.0 MPa |
| bending strength | ASTM D790 | 88.3 MPa |
| Electrical performance | Test Condition | Test Method | Trinseo/PC/ABS 7880ECO |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Volume resistivity | ASTM D257 | 11 ohms·cm | |
| dielectric strength | ASTM D149 | 20 kV/mm |
| flammability | Test Condition | Test Method | Trinseo/PC/ABS 7880ECO |
|---|---|---|---|
| Burning wire flammability index | 0.50mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 2.0mm | UL 94 | 5VB5VB |
| 1.0mm | UL 94 | V-0 | |
| 0.50mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | Trinseo/PC/ABS 7880ECO |
|---|---|---|---|
| melt mass-flow rate | 260°C/2.16kg | ASTM D1238 | 15 g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.50to0.70 % |
| melt mass-flow rate | 230°C/3.8kg | ASTM D1238 | 10 g/10min |
| density | ASTM D792 | 1.18 g/cm³ |
| Thermal performance | Test Condition | Test Method | Trinseo/PC/ABS 7880ECO |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 80.0 °C |
| vicat | ASTM D15253 | 102 °C |
Contact Us
Get App
Top