Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 SX90398 SABIC INNOVATIVE US
LNP™ STAT-KON™
Electrical appliances、Plastic bag
lubrication、wear resistant、Filler: proprietary fille
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/SX90398 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 85 kJ/m² |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 20.8 J | |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 7.6 kJ/m² |
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 9.73 J |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/SX90398 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 1440 Mpa | |
| ASTM D638 | 1910 Mpa | ||
| elongation | 断裂 | ASTM D638 | 120 % |
| 屈服 | ASTM D638 | 5.3 % | |
| bending strength | ISO 178 | 50.9 Mpa | |
| Flexural modulus | ISO 178 | 1760 Mpa | |
| bending strength | ASTM D790 | 62.4 Mpa | |
| tensile strength | 断裂 | ASTM D638 | 36.1 Mpa |
| 断裂 | ISO 527-2 | 35.0 Mpa | |
| 屈服 | ASTM D638 | 44.0 Mpa | |
| 屈服 | ISO 527-2 | 38.0 Mpa | |
| Flexural modulus | ASTM D790 | 1780 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/SX90398 |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1.0E+2to1.0E+6 ohms |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/SX90398 |
|---|---|---|---|
| Shrinkage rate | MD:24小时 | ISO 294-4 | 1.1 % |
| MD：24小时 | ASTM D955 | 1.1 % | |
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.20 % |
| 平衡,23°C,50%RH | ISO 62 | 0.30 % | |
| Shrinkage rate | TD：24hr | ASTM D955 | 1.7 % |
| TD:24小时 | ISO 294-4 | 1.7 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/SX90398 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Bf | 104 °C |
| Linear coefficient of thermal expansion | TD：-40到40°C | ASTME831 | 9.9E-05 cm/cm/°C |
| TD：-40到40°C | ISO 11359-2 | 9.9E-05 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 114 °C |
| Linear coefficient of thermal expansion | MD：-40到40°C | ASTME831 | 1E-04 cm/cm/°C |
| MD：-40到40°C | ISO 11359-2 | 1E-04 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火,64.0mm跨距，HDT | ISO 75-2/Af | 73.8 °C |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 67.7 °C |
Contact Us
Get App
Top