Impact resistance	Test Condition	Test Method	BASF GERMANY/B3GK24 BK00564
Charpy Notched Impact Strength	23°C	ISO 179	5.0 kJ/m²
Impact strength of cantilever beam gap	-40°C	ASTM D256	32 J/m
Impact strength of cantilever beam gap		23°C	ASTM D256	37 J/m
Charpy Notched Impact Strength	-30°C	ISO 179	5.0 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179	39 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179	40 kJ/m²

Mechanical properties	Test Condition	Test Method	BASF GERMANY/B3GK24 BK00564
Charpy Notched Impact Strength	+23℃,干/湿		40/90 KJ/m
Charpy Notched Impact Strength		30℃干		39 KJ/m
Tensile creep modulus	1000h,湿		2000 Mpa
Fracture stress (V=50mm/min)	干/湿		110/65 Mpa
ball-indentation hardness	干/湿		170/120 Mpa
Tensile modulus	23°C	ISO 527-2	6000 Mpa
Charpy Notched Impact Strength	30℃，干/湿		5 KJ/m
tensile strength	断裂,23°C	ISO 527-2	105 Mpa
tensile strength		断裂,23°C	ASTM D638	110 Mpa
Tensile yield stress (V=50mm/min)	干/湿		110/65 Mpa
Tensile strain	断裂,23°C	ISO 527-2	3.5 %
Tensile modulus	干/湿		6000/3000 Mpa
Impact strength of cantilever beam gap	+23℃，干/湿		5/8.5 KJ/m
Flexural modulus	23°C	ASTM D790	4830 Mpa
elongation at break	干/湿，V=50mm/min		3.5/15 %

Electrical performance	Test Condition	Test Method	BASF GERMANY/B3GK24 BK00564
Compared to the Leakage Traceability Index (CTI)	干/湿		CTI 425
Volume resistivity		IEC 60093	1E+15 ohms·cm
dielectric strength	K20/P50，干/湿		135/53 KV/mm
Volume resistivity	1.50mm	ASTM D257	1E+15 ohms·cm
dielectric constant	1MHz，干/湿		3.9/4.6 J/(g.K)
Surface Resistivity	干/湿		10 Ω
loss angle	1MHz，干/湿		0.02/0.07
dielectric constant	1MHz	IEC 60250	3.90
bending strength	干/湿		175/100 Mpa
Volume resistivity	干/湿		10 Ω.cm
Dissipation Factor	1MHz	IEC 60250	0.020
Compared to the Leakage Tracking Index (CTI)		IEC 60112	V

flammability	Test Condition	Test Method	BASF GERMANY/B3GK24 BK00564
UL flame retardant rating	0.75mm	UL 94	HB
		3.0mm	UL 94	HB
		1.5mm	UL 94	HB

physical property	Test Condition	Test Method	BASF GERMANY/B3GK24 BK00564
Shrinkage rate	MD：3.18mm		0.40 %
Water absorption rate	饱和	ASTM D570	6.6 %
		平衡,50%RH	ASTM D570	2.0 %
		平衡,23°C,50%RH	ISO 62	2.0 %
		饱和,23°C	ISO 62	6.6 %
density		ASTM D792	1.34 g/cm³
density			ISO 1183	1.34 g/cm³
Melt volume flow rate	275°C/5.0kg	ISO 1133	70.0 cm3/10min

Thermal performance	Test Condition	Test Method	BASF GERMANY/B3GK24 BK00564
Heat distortion temperature	1.8MPa,未退火，HDT	ASTM D648	200 °C
RTI Str	0.75mm	UL 746	65.0 °C
RTI Imp	1.5mm	UL 746	65.0 °C
Heat distortion temperature	1.8MPa负荷，干态，HDT		200 °C
melting temperature		ASTM D3418	220 °C
RTI Elec	3.0mm	UL 746	65.0 °C
Heat distortion temperature	0.45MPa负荷，干态，HDT		215 °C
RTI Imp	3.0mm	UL 746	65.0 °C
maximum service temperature			200 °C
melting temperature		ISO 3146	220 °C
Linear coefficient of thermal expansion	（23-80）℃，干态		3.5-4 10
RTI Elec	0.75mm	UL 746	65.0 °C
RTI Imp	0.75mm	UL 746	65.0 °C
Heat distortion temperature	0.45MPa,未退火，HDT	ASTM D648	215 °C
Heat distortion temperature		0.45MPa,未退火，HDT	ISO 75-2/B	215 °C
Linear coefficient of thermal expansion	MD		3.8E-05 cm/cm/°C
Heat distortion temperature	1.8MPa,未退火，HDT	ISO 75-2/A	200 °C
RTI Str	1.5mm	UL 746	65.0 °C
RTI Str		3.0mm	UL 746	65.0 °C
RTI Elec	1.5mm	UL 746	65.0 °C
thermal conductivity	干态		0.34 W/(m.K)
Linear coefficient of thermal expansion	MD	ASTME831	1E-05 cm/cm/°C
specific heat	干态		1.4 J/(g.K)

Get App

Top