Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Polyester, TP DuraStar™ DS1110UVI Eastman Chemical Company
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Eastman Chemical Company/DuraStar™ DS1110UVI |
---|---|---|---|
Suspended wall beam without notch impact strength | -40°C | ASTM D4812 | 无断裂 |
Impact strength of cantilever beam gap | -40°C | ASTM D256 | 40 J/m |
23°C | ASTM D256 | 80 J/m | |
23°C | ISO 180 | 7.8 kJ/m² | |
-40°C | ISO 180 | 4.8 kJ/m² | |
Suspended wall beam without notch impact strength | 23°C | ASTM D4812 | 无断裂 |
Dart impact | 23°C,能量到力量峰值 | ISO 6603-2 | 58.7 J |
-40°C,能量到力量峰值 | ISO 6603-2 | 52.6 J | |
-40°C,EnergyatPeakLoad | ASTM D3763 | 48.0 J | |
23°C,EnergyatPeakLoad | ASTM D3763 | 42.0 J |
hardness | Test Condition | Test Method | Eastman Chemical Company/DuraStar™ DS1110UVI |
---|---|---|---|
Rockwell hardness | R级,23°C | ASTM D785 | 103 |
Mechanical properties | Test Condition | Test Method | Eastman Chemical Company/DuraStar™ DS1110UVI |
---|---|---|---|
elongation | 断裂,23°C | ISO 527-2 | 200 % |
tensile strength | 断裂,23°C | ASTM D638 | 51.0 MPa |
Flexural modulus | 23°C | ISO 178 | 1850 MPa |
Tensile modulus | 23°C | ISO 527-2 | 1800 MPa |
tensile strength | 断裂,23°C | ISO 527-2 | 46.0 MPa |
Flexural modulus | 23°C | ASTM D790 | 2000 MPa |
elongation | 屈服,23°C | ASTM D638 | 5.0 % |
tensile strength | 屈服,23°C | ASTMD638 | 47.0 MPa |
bending strength | 屈服,23°C | ASTM D790 | 69.0 MPa |
elongation | 屈服,23°C | ISO 527-2 | 4.0 % |
断裂,23°C | ASTM D638 | 300 % | |
bending strength | 23°C | ISO 178 | 65.0 MPa |
optical performance | Test Condition | Test Method | Eastman Chemical Company/DuraStar™ DS1110UVI |
---|---|---|---|
transmissivity | 总计 | ASTM D1003 | 91.0 % |
Haze ratio | ASTM D1003 | 0.30 % | |
transmissivity | 常规 | ASTM D1003 | 89.0 % |
physical property | Test Condition | Test Method | Eastman Chemical Company/DuraStar™ DS1110UVI |
---|---|---|---|
density | 23°C | ISO 1183 | 1.19 g/cm³ |
Shrinkage rate | MD:3.20mm | ASTM D955 | 0.20to0.60 % |
density | -- | ASTM D792 | 1.20 g/cm³ |
Thermal performance | Test Condition | Test Method | Eastman Chemical Company/DuraStar™ DS1110UVI |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 65.0 °C |
0.45MPa,未退火,HDT | ASTM D648 | 75.0 °C | |
0.45MPa,未退火,HDT | ISO 75-2/B | 72.0 °C | |
1.8MPa,未退火,HDT | ISO 75-2/A | 66.0 °C |
Contact Us
Get App
Top