Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA RTP 4405 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 4405 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 590 J/m |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 75 J/m |
| hardness | Test Condition | Test Method | RTP US/RTP 4405 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 125 |
| Supplementary Information | Test Condition | Test Method | RTP US/RTP 4405 |
|---|---|---|---|
| Primary Additive | 30 % |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 4405 |
|---|---|---|---|
| tensile strength | ASTM D638 | 172 MPa | |
| elongation | 屈服 | ASTM D638 | 2.0to3.0 % |
| Tensile modulus | ASTM D638 | 10300 MPa | |
| Flexural modulus | ASTM D790 | 9650 MPa | |
| bending strength | ASTM D790 | 241 MPa |
| physical property | Test Condition | Test Method | RTP US/RTP 4405 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.20to0.35 % |
| water content | 0.10 % | ||
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.42 % |
| density | ASTM D792 | 1.42 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 4405 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 260 °C |
Contact Us
Get App
Top