Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PSU E3010 BASF GERMANY
Ultrason®E
Electrical field,Electronic field,Household appliances,Household appliances,Electric wire,Cable,Automotive sector,Bottle cap
High toughness,Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | BASF GERMANY/E3010 |
---|---|---|---|
Ball Pressure Test | ISO 2039-1 | 154 Mpa |
thermal performance | Test Condition | Test Method | BASF GERMANY/E3010 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,未退火 | ISO 75-2/A | 207 °C |
Linear coefficient of thermal expansion | MD | 5.2E-05 cm/cm/°C | |
RTI Elec | 1.6mm | UL 746 | 180 °C |
3.0mm | UL 746 | 180 °C | |
RTI Imp | 1.6mm | UL 746 | 180 °C |
3.0mm | UL 746 | 180 °C | |
RTI Str | 3.0mm | UL 746 | 190 °C |
1.6mm | UL 746 | 190 °C |
mechanical properties | Test Condition | Test Method | BASF GERMANY/E3010 |
---|---|---|---|
Tensile modulus | 23°C | ISO 527-2 | 2650 Mpa |
Tensile strain | 屈服,23°C | ISO 527-2 | 6.9 % |
tensile strength | 屈服,23°C | ISO 527-2 | 85.0 Mpa |
Electrical performance | Test Condition | Test Method | BASF GERMANY/E3010 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 4 | |
Dielectric constant | 1MHz | IEC 60250 | 3.80 |
100Hz | IEC 60250 | 3.90 | |
Dielectric strength | IEC 60243-1 | 34 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 0.014 |
100Hz | IEC 60250 | 1.7E-03 | |
Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
Volume resistivity | IEC 60093 | >1.0E+13 ohms·cm |
Physical properties | Test Condition | Test Method | BASF GERMANY/E3010 |
---|---|---|---|
density | ISO 1183 | 1.37 g/cm³ | |
Melt Volume Flow Rate (MVR) | 360°C/10.0kg | ISO 1133 | 35.0 cm3/10min |
Shrinkage rate | MD | ISO 294-4 | 0.85 % |
TD | ISO 294-4 | 0.90 % | |
Water absorption rate | 饱和,23°C | ISO 62 | 2.2 % |
平衡,23°C,50%RH | ISO 62 | 0.80 % |
impact performance | Test Condition | Test Method | BASF GERMANY/E3010 |
---|---|---|---|
Charpy Notched Impact Strength | -30°C | ISO 179 | 8.0 kJ/m² |
23°C | ISO 179 | 8.0 kJ/m² | |
Impact strength of cantilever beam gap | 23°C | ISO 180 | 8.0 kJ/m² |
-30°C | ISO 180 | 8.0 kJ/m² | |
Impact strength of simply supported beam without notch | -30°C | ISO 179 | NoBreak |
23°C | ISO 179 | NoBreak |
flammability | Test Condition | Test Method | BASF GERMANY/E3010 |
---|---|---|---|
UL flame retardant rating | 3.0mm | UL 94 | V-0 |
1.6mm | UL 94 | V-0 |