Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PMMA+PVC KYDEX® 6185 Sekisui (Hong Kong) Limited
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 6185 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 270 J/m |
| Supplementary Information | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 6185 |
|---|---|---|---|
| Temperature | 163to200 °C |
| hardness | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 6185 |
|---|---|---|---|
| Rockwell hardness | R级,3.18mm | ASTM D785 | 104 |
| Mechanical properties | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 6185 |
|---|---|---|---|
| Flexural modulus | 3.18mm | ASTM D790 | 2240 MPa |
| tensile strength | 屈服,3.18mm | ASTM D638 | 44.0 MPa |
| bending strength | 屈服,3.18mm | ASTM D790 | 66.0 MPa |
| physical property | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 6185 |
|---|---|---|---|
| Shrinkage rate | MD：3.18mm | 0.40to0.60 % | |
| density | ASTM D792 | 1.33to1.37 g/cm³ |
| Thermal performance | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 6185 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,3.18mm，HDT | ASTM D648 | 85.0 °C |
| 1.8MPa,退火,3.18mm，HDT | ASTM D648 | 90.6 °C | |
| 最高使用温度，HDT | ASTM D648 | 85to90 °C |
Contact Us
Get App
Top