Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP Copolymer Dynacom CT-130 V2 Dynachem Co. Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Dynachem Co. Ltd./Dynacom CT-130 V2 |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 105 |
| thermal performance | Test Condition | Test Method | Dynachem Co. Ltd./Dynacom CT-130 V2 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 135 °C |
| Vicat softening temperature | ASTM D15255 | 157 °C |
| mechanical properties | Test Condition | Test Method | Dynachem Co. Ltd./Dynacom CT-130 V2 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 3920 MPa | |
| bending strength | ASTM D790 | 49.0 MPa | |
| elongation | Break | ASTM D638 | 10 % |
| tensile strength | ASTM D638 | 32.0 MPa |
| Electrical performance | Test Condition | Test Method | Dynachem Co. Ltd./Dynacom CT-130 V2 |
|---|---|---|---|
| Arc resistance | ASTM D495 | 70.0 sec | |
| Dielectric strength | 1.00mm | ASTM D149 | 40 kV/mm |
| Volume resistivity | ASTM D257 | 1E+17 ohms·cm |
| Physical properties | Test Condition | Test Method | Dynachem Co. Ltd./Dynacom CT-130 V2 |
|---|---|---|---|
| density | ASTM D792 | 1.17 g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 14 g/10min |
| Shrinkage rate | MD2 | ASTM D955 | 1.2to1.3 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | <0.020 % |
| impact performance | Test Condition | Test Method | Dynachem Co. Ltd./Dynacom CT-130 V2 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256 | 21 J/m |
| flammability | Test Condition | Test Method | Dynachem Co. Ltd./Dynacom CT-130 V2 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | V-2 |