Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC S-3000VR MITSUBISHI KOREA
IUPILON™
Automotive sector,Electrical appliances,Electronic field,Electrical field
Weather resistance,transparent,Low viscosity,Flame retardant,Demolding ability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | MITSUBISHI KOREA/S-3000VR |
---|---|---|---|
Combustibility | UL 94 | V-2 | |
Hot deformation temperature | 18.6kgf/cm | ASTM D648 | 130-136 °C |
4.6kgf/cm | ASTM D648 | 136-142 °C | |
Linear coefficient of thermal expansion | 6-7 |
mechanical properties | Test Condition | Test Method | MITSUBISHI KOREA/S-3000VR |
---|---|---|---|
Bending modulus | ASTM D790 | 2.3 GPa | |
bending strength | ASTM D790 | 80.4-90.2 Mpa | |
Impact strength of cantilever beam gap | ASTM D256 | 740-1000 J/m | |
Stretching length | ASTM D638 | 90-140 % | |
tensile strength | ASTM D638 | 58.8-68.6 Mpa |
Electrical performance | Test Condition | Test Method | MITSUBISHI KOREA/S-3000VR |
---|---|---|---|
Dielectric constant | 10 | ASTM D150 | 25.2 Pf/m |
Dielectric loss | 10,Tangent | ASTM D150 | 0.0082 |
Dielectric strength | ASTM D149 | 18-22 KV/mm |
Physical properties | Test Condition | Test Method | MITSUBISHI KOREA/S-3000VR |
---|---|---|---|
Rockwell hardness | ASTM D785 | 123 R | |
Shrinkage rate | Flow | 0.5-0.8 % | |
Across Flow | 0.5-0.8 % | ||
Water absorption rate | 23℃,24hrs | ASTM D 570 | 0.23-0.26 % |