Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC CY6414-701 SABIC INNOVATIVE US
LEXAN™
Electrical applications、Lighting applications、Automotive Applications
Thermal stability、Middle flow
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/CY6414-701 |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 28 kJ/m² |
-30°C | ISO 179/1eA | 12 kJ/m² | |
0°C | ISO 179/1eA | 17 kJ/m² |
Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/CY6414-701 |
---|---|---|---|
Tensile modulus | ASTM D638 | 2330 Mpa | |
elongation | 断裂 | ASTM D638 | 85 % |
屈服 | ASTM D638 | 6.0 % | |
tensile strength | 断裂 | ASTM D638 | 62.0 Mpa |
屈服 | ASTM D638 | 64.0 Mpa | |
Tensile strain | 断裂 | ISO 527-2/50 | >100 % |
屈服 | ISO 527-2/50 | 5.7 % |
Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/CY6414-701 |
---|---|---|---|
Dissipation Factor | 1kHz | ASTM D150 | 1.7E-03 |
dielectric constant | 1kHz | ASTM D150 | 3.01 |
Dissipation Factor | 1MHz | ASTM D150 | 8.8E-03 |
High arc combustion index (HAI) | HAI | UL 746 | PLC 1 |
Hot wire ignition (HWI) | HWI | UL 746 | PLC 2 |
dielectric constant | 1MHz | ASTM D150 | 2.95 |
Surface Resistivity | IEC 60093 | 0.0to4.0E+16 ohms | |
Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 3 |
Dissipation Factor | 1MHz | IEC 60250 | 8.8E-03 |
flammability | Test Condition | Test Method | SABIC INNOVATIVE US/CY6414-701 |
---|---|---|---|
UL flame retardant rating | 2.5mm | UL 94 | 5VB |
Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 775 °C |
UL flame retardant rating | 1.2mm | UL 94 | V-0 |
Hot filament ignition temperature | 1.5mm | IEC 60695-2-13 | 775 °C |
Burning wire flammability index | 0.75mm | IEC 60695-2-12 | 960 °C |
Limiting Oxygen Index | ISO 4589-2 | 32 % | |
Hot filament ignition temperature | 0.75mm | IEC 60695-2-13 | 775 °C |
physical property | Test Condition | Test Method | SABIC INNOVATIVE US/CY6414-701 |
---|---|---|---|
melt mass-flow rate | 260°C/5.0kg | ASTM D1238 | 14 g/10min |
Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/CY6414-701 |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,6.40mm,HDT | ASTM D648 | 118 °C |
vicat | -- | ISO 306/B120 | 135 °C |
Linear coefficient of thermal expansion | TD:-40到40°C | ISO 11359-2 | 7E-05 cm/cm/°C |
vicat | -- | ISO 306/B50 | 134 °C |
Linear coefficient of thermal expansion | MD:-40到40°C | ISO 11359-2 | 7E-05 cm/cm/°C |
ball-indentation hardness | 125°C | IEC 60695-10-2 | Pass |
125°C5 | IEC 60695-10-2 | Pass |
Contact Us
Get App
Top