Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PET Kingfa PET-G30 Kingfa
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Kingfa/Kingfa PET-G30 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256 | 85 J/m |
| hardness | Test Condition | Test Method | Kingfa/Kingfa PET-G30 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 120 |
| Mechanical properties | Test Condition | Test Method | Kingfa/Kingfa PET-G30 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.5 % |
| tensile strength | ASTM D638 | 145 MPa | |
| Flexural modulus | ASTM D790 | 9500 MPa | |
| bending strength | ASTM D790 | 205 MPa |
| Electrical performance | Test Condition | Test Method | Kingfa/Kingfa PET-G30 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
| flammability | Test Condition | Test Method | Kingfa/Kingfa PET-G30 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | HB |
| 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Kingfa/Kingfa PET-G30 |
|---|---|---|---|
| Shrinkage rate | MD:23°C | ASTM D955 | 0.30 % |
| TD:23°C | ASTM D955 | 0.90 % | |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.070 % |
| density | ASTM D792 | 1.54 g/cm³ |
| Thermal performance | Test Condition | Test Method | Kingfa/Kingfa PET-G30 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 230 °C |
| 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 240 °C |
Contact Us
Get App
Top