Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

NBR NANCAR® 1053X26 Nantex Industry Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 1053X26 |
---|---|---|---|
Shore hardness | 邵氏A3 | ASTM D2240 | 67 |
邵氏A2 | ASTM D2240 | 66 | |
邵氏A4 | ASTM D2240 | 68 |
elastomer | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 1053X26 |
---|---|---|---|
tensile strength | 屈服4 | ASTM D412 | 23.9 MPa |
屈服2 | ASTM D412 | 22.8 MPa | |
elongation | 断裂7 | ASTM D412 | 530 % |
tensile strength | 屈服3 | ASTM D412 | 23.2 MPa |
elongation | 断裂6 | ASTM D412 | 540 % |
compression set | 100°C,70hr | ASTM D395 | 49 % |
tensile strength | 300%应变6 | ASTM D412 | 10.2 MPa |
300%应变5 | ASTM D412 | 9.02 MPa | |
elongation | 断裂5 | ASTM D412 | 560 % |
tensile strength | 300%应变7 | ASTM D412 | 10.5 MPa |
tear strength | ASTM D624 | 52.0 kN/m |
physical property | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 1053X26 |
---|---|---|---|
density | 0.960 g/cm³ | ||
bound acrylonitrile content | 内部方法 | 26.0 % | |
Mooney viscosity | ML1+4,100°C | ASTM D1646 | 52 MU |
stabilizer | Non-staining |
aging | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 1053X26 |
---|---|---|---|
Change rate of hardness (Shore) in the air | 支撐A,100°C,70hr,在ASTM#3油中 | ASTM D471 | -18 |
邵氏A,100°C,70hr | ASTM D865 | 4.0 | |
Change rate of ultimate elongation in air | 100°C,70hr,在ASTM#1油中 | ASTM D471 | -21 % |
Change rate of hardness (Shore) in the air | 支撐A,100°C,70hr,在ASTM#1油中 | ASTM D471 | 0.0 |
Change rate of tensile strength in air | 100°C,70hr | ASTM D865 | -1.0 % |
volume change | 100°C,70hr,ASTM标准油(3号) | ASTM D471 | 38 % |
Change rate of ultimate elongation in air | 100°C,70hr,在ASTM#3油中 | ASTM D471 | -16 % |
Change rate of tensile strength in air | 100°C,70hr,在ASTM#1油中 | ASTM D471 | -9.0 % |
volume change | 100°C,70hr,ASTM标准油(1号) | ASTM D471 | 2.9 % |
Change rate of tensile strength in air | 100°C,70hr,在ASTM#3油中 | ASTM D471 | -30 % |
Change rate of ultimate elongation in air | 100°C,70hr | ASTM D865 | -25 % |
Thermal performance | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 1053X26 |
---|---|---|---|
Heat loss | ASTM D5688 | 0.40 % |
Contact Us
Get App
Top